Prusa XL 5015 Fan Mod / EASY MOD V2 (Project Mastodon)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No drilling / Cutting - Just printing and soldering.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Things you have to buy :
5015 FAN (MX Research) or any other 5V 3PIN 5015 fan. I got mine from Amazon.
Connecter (you also can take it from the stock fan)
I recommend to print it in PC-CF, Nylon or at least ASA.
For printing
the 5015 housing you only need a small support on the screw hole.
the duct you can chose the orientation, i tested both. both are fine.
print settings
min 3 perimeters and min 15% infill
0,2 Layer height
UPDATE 5015 Fan duct V30 see files and enclosure version.

Building
cut the connector cable from Molex in half, the length is perfect and solder it to the fan. So you can use one cable for 2 fans.
Or use the cable from the stock fan


Make sure that the connection are right if you buy a other fan. The connecter is still the same but on other fans it may various.
Like from the original model you have to open the fan

3. place the fan in the new housing, press it down (on my i clicks) And put the cables in the channel.

on my fan i don't have to trimm or cut anything from the housing.
use the original screws to fasten it

The cut i thigh but in don't collide with the frame

The fan duct i slightly higher (low-profile) from the original model, cause it collide with my nozzle cleaning mount.

test print with PETG
Print it at least with ASA
recommend in
PC-CF /Nylon-CF
On my fan from Amazon i got an fan error in the fan calibration with the "black fan type"
I change it to silver and the fan had no issue in the fan calibration.

if you have any idea / question , please let me know.