1 / 1
Short 33rpm spindle for Dual 1218 turntable — image 1

Short 33rpm spindle for Dual 1218 turntable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Got a used Dual 1218 turntable off Craigslist for a relative, fixed it and now it's working but it was missing the…

Rating
0 / 5
Likes
3
Downloads
36
Makes
0
Views
203
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution

Got a used Dual 1218 turntable off Craigslist for a relative, fixed it and now it's working but it was missing the center spindles. So I tossed design this together in about 15 minutes, and printed it in about 25 minutes. It's for single-play 33 rpm (never stack records!!), and works great. It will also fit Dual 1257, and probably other models (1228, 1219, 1229 I'm pretty sure, probably loads of others from the 70s and 80s. Quick print, I used Pillar supports (in Slic3r PE) but it might print without. Beats paying $15 for one from ebay!

Print Settings

Printer:

Folgertech FT-5

Rafts:

No

Supports:

Yes

Resolution:

0.25mm

Infill:

40%


Notes:

Make sure your peripheral number is small enough for the relatively thin walls of this. You can also print it 100% infill if you want, since that's pretty much what it comes out to, though that can make overextrusion a problem.

Category: Audio

Tags