Sidekick64 Cartridge Case: 4 LED holes and closed jumper holes at upper side
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the upper side of Sidekick64 Cartridge Case by bigby. 4 LED holes and closed jumper holes.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the upper side of the nice Sidekick64 Cartridge Case by bigby.
I have added 2 more holes to see all 4 LEDs. Further I have closed the jumper holes at the front. Since I use my Sidekick64 only with a C64 I saw no need to change the jumper settings (powering through C64, usage of the Opt-button, delay). In my opinion this can be set up during assembly. If changing the settings becomes necessary the case must be opened, which is ok for me.
I have also put a model only with the 4 LED holes modification (but open jumper holes).
This is only the upper part of the case! The lower part can be found here:
https://www.printables.com/de/model/122968-sidekick64-cartridge-case
Please note the license for this design! It does NOT allow for commercial use.
Use the same print settings as for the original model.