1 / 6
OnStep lite replacement board for EQ 6 Pro
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OnStep lite board for EQ 6 Pro on base Howard Dutton project Key properties: Easy replacement of the original Synscan…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 798
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v2.0
OnStep lite board for EQ 6 Pro on base Howard Dutton project
Key properties:
- Easy replacement of the original Synscan board (four screws and reconnect three wires)
- Tennsy4.0 (or 3.2) CPU mainboard MiniPCB pin maps compatible
- Big USB B port is very well working with ZWO ASiair
- Bluetooth or Wi-Fi module
- Internal real time clock with battery backup (need add 32.468 khz crystal to teensy 3.2 board)
Advance features:
- Port for polar scope iluminator
- Internal DSLR timer
- 8V2 power port for DSLR
- Buzzer
Wiring diagram and PCB are on EasyEDA.
For enable advance feature requires the following minor modifications MiniPCB.h
#define ReticlePin 23 // Aux4 // Drain #define TonePin Aux3 // 29 // Tone
For EQ6 recommended upgrade to Rowan Engineering timing belt set
Category: DIY