46 models
New version of the tray for the Skywatcher EQ6 R Pro mount, more rigid and with grooves. This tray can be mounted on any mount with a 2" diameter tube and an angle of 56°, to maintain horizontality. To prevent rotation on the polished…
see the update at the end. Supports for the EQ6 R pro . Tested on soft ground (sand ground and grass), ceramic floor with relief and sandstone floor, improving stability, accidental slippage and preserving the ceramic floor. Optionally,…
Created with Siemens NX 12 Printed with Creality Ender 3 in PLA Print time with 0,4mm Nozzle: ~3h PS: It works, but the model fits not perfectly! It was designed rather quick and dirty ;-)
Leveling ring for your EQ6R Pro, because the built-in level is worthless (at least mine is). You can connect the mount to the tripod with the ring in place, and if you move or bump your mount, you can re-level without removing the mount…
Modeled after original best to print in PETG for that flex much easier to install i printed it on side with brim supports needed.
I created this bracket to fix a ZWO 12V 5A power adapterto the tripod of a Sky Watcher EQ6-R equatorial mount. Like it? Buy me a coffee: https://buymeacoffee.com/erwinha
Auxiliary tray for the SkyWatcher EQ6 R pro mount. See: https://www.printables.com/es/model/304688-new-tray-for-the-skywatcher-eq6-r-pro-mount In case it can be useful, I leave you this tray, adapted to the tripod of the EQ6R pro. It is…
EN Handle for Siemens EQ6 Coffee Machine Water Tank The brief and basis for this project was a "handle" with one end broken off. I measured and considered how to design a model that has "no flat surfaces" – it's a truly complex shape. By…
Malolo has created a really nice customasable case for the Raspberry Pi. I needed a mount for my Sky Watcher EQ6-R tripod so I could mount a Raspberry loaded with AstroBerry on it. I used the extra high version of the Malolo ( Malolo's…
Adapter for EQ6R Leg to hold Power Box for Telescope Devices
I've been using these printed in PETG for the better part of a year without issue. Replacing the altitude lever-knob This is a drop in replacement. Start by removing the original lever and spring by unscrewing the internal screw. The…
This is a conversion of Orion Atlas to Onstep. It should also fit EQ6 class mounts. It is using FYSETC E4 running OnStepX
Permet de maintenir une perche universelle plus large que celle d'origine
Pier adapter for my EQ6 mount, 3D print possible, but for more robustness, I made it on CNC in aluminium.
I created this bracket to fix a Omegon dew controllerbox to the tripod of a Sky Watcher EQ6-R equatorial mount.
Didn't like the original model, so i maked
Der Griff des Wassertank meiner Kaffeemaschine brach und keine Ersatzteil war in Sicht. Für mich der Grund endlich in CAD und 3D Printing einzusteigen. Letztendlich konnte ich das Modell nachbauen, ohne das Design, rein funktional und mit…
When using the EQ6R Pro mount in a fully automated setup, there is a risk the cables get caught on one of the handles. This is a big problem with fully automated setups, that run unattended through a whole night (possiblity with a…
If you get into astrophotography with a mirrorless or DSLR, the next advised upgrade is a tracking mount. If you know you're going to be in it for a while, the EQ6R Pro is a very reliable option. But while you're saving for an OTA, and…
Abdeckung Spiralfeder Brüheinheit
For the threads for the m12 bolt probably want a layer height around 0.1 get enough detail. The hook gap (width) is around 50mm Printed on Bambu lab p1s
Simple covers for the EQ6 pro. Print with supports touching buildplate.
EQ6R-pro upgraded plate for 12v power plugs and/or fuses
vylepšení nastavení výšky montáže eq6 pro. zakoupil jsem použitou montáž a byl problém s nastavováním výšky a utažením v potřebném úhlu. zkrátka šroub klouzal po segmentu a ohýbal se . po této úpravě již s nastavením nemám problém jelikož…
The rear elevation adjustment bolt on the Sky-Watcher EQ6R-Pro mount has a spring loaded handle that can be difficult to use for fine adjustments while doing the polar-alignment (PA). It tends to slip and not grab all the time. While…
Remixed to fit the larger 2" / 50mm tripod legs Category: Physics & Astronomy
Remixed my Model to fit the Power Supply of the Pegasus Advance, since it has bigger dimensions due to user request
For me it was the option to optimize the filling of the beans. But it’s also an extender. Print it with organic supports.
This side cover for the Skywatcher EQ6-R has mounting points for a FYSETC E4 used as an Onstep controller. On the top side, there is a mounting point for an XL4015-based DC-DC converter to provide 8.3 V for Canon dummy batteries. This…
EQ Direct (EQMod) module for SkyWatcher EQ6 Pro mount Wiring diagram and PCB Gerber files is included BOM 1x CH340G chip 1x 12.000Hhz crystal 2x 3mm red LED 2x 4k7 axial 0.25W rezistor 2x 22pF ceramic capacitor 2x 100nF ceramic capacitor…
it's only the inner rotule, changed to support a 3/8 x 16 screw, to convert these wonderful LARGE AND STEADY feet for tripod use. https://www.printables.com/model/309201-supports-for-skywatcher-eq6-r-pro-mount all the glory goes to the…
I printed it with 0.2, 40% infill, brim and supports and worked well with PLA. Have not tried other settings. This is an original model, inspired by brackets for similar other Beelink models with different dimensions.
https://www.best-power.cz/bateriove-generatory-230v/bateriovy-generator-viking-vali150/ HEQ5: https://www.printables.com/model/1187519-heq5-powerbank-viking-vali150
Hi! I made this to attach to my tripod legs, to stop me kicking them accidentally. Requires 6x M4 threated inserts and 6x M4 countersunk screws. Printed in Copymaster 3D Glow PLA Filament Layer:0.2mm Infill: 20%
To separate water from used coffee ground for Siemens EQ6 coffee machine. This grating avoids used coffee ground to end up as a soggy waste in the bottom of the container. Printed with PETG, 15% infill.
Hi! I made this to mount a PSU to the handle of my EQ6-R, inspired by something I saw on facebook, made for this PSU: https://amzn.eu/d/dVOVotL I used this model for handle geometry: https://www.thingiverse.com/thing:5414767 Printed in…
The screw on my clutch lever broke when trying to remove, "thanks" to threadlocker. I couldn't successfully drill out the remainder of the screw embedded in the clutch, so I replaced the clutch lever with a press-fit version instead.…
Um die Bohnenmenge meiner Siemens EQ6 S100 Kaffeemaschine zu erweitern und eine ganze KaffeePackung von 1 KG auf einmal einfüllen zu können habe ich diese Erweiterung gezeichnet. sie passt über die Original Bohnenaufnahme und wird mit dem…
Protects the extension rod especially during transport. Printed from flexible TPU material.
I needed something to hold my RPi 5 on the mount. I used the hole that was previously used for PA and PoleMaster. This is specific to the RPi5 with the red & white curved top case. Add a couple M4 grub screws to attach to the mount.
Modeled after original best to print in PETG for that flex much easier to install i printed it on side with brim supports needed.
see the update at the end. Supports for the EQ6 R pro . Tested on soft ground (sand ground and grass), ceramic floor with relief and sandstone floor, improving stability, accidental slippage and preserving the ceramic floor. Optionally,…
In order to polar align your mount during daylight or even between two sessions, you have to take markers during night time to place your mount in the same exact position. This can be greatly simplified using a line or cross laser…
This tool allow the adjustment of the split nuts on the NEQ6/EQ6 easily. You need two jewellers screwdrivers with 3.5mm wide blades. Stick them in the holes, line them up with the nut, and torque using another screwdriver. No pressure is…
