EQ6R Pro Tripod Leveling Ring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick and easy way to level & relevel your EQ6R Pro tripod without having to remove the mount. Required: Bubble Levels
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 212
- Makes
- 0
- Views
- 925
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Leveling ring for your EQ6R Pro, because the built-in level is worthless (at least mine is). You can connect the mount to the tripod with the ring in place, and if you move or bump your mount, you can re-level without removing the mount to access the tripod head.
Two versions available, with and without windows to view the bubble level from the side/below. The version with the windows is more fragile, probably better in PETG.
Print advice:
If you have trouble with the small, separate pieces detaching during a print, clean the plate and use glue stick. Brim shouldn't be necessary. I used 0.20mm layers, 10% gyroid infill, and 2 perimeters, which felt pretty solid.
Materials:
Designed for use with 10mm x 40mm bubble level units. Here are (non-affiliate) the ones I used, but I just picked out the cheapest ones at the time I was making this level. I haven't tested them in freezing temperatures yet, so be wary with Winter use.
Feel free to message me or comment here if you want another version added for the size of bubble level you have available.