1 / 6
Printrbot LC side fan mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modified laser cut part #291 to mount a 40mm cooling fan. The fan can be adjusted. Will work with a Printrbot Plus…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A modified laser cut part #291 to mount a 40mm cooling fan. The fan can be adjusted.
Will work with a Printrbot Plus
Solidworks 2012 available below.
Instructions
- Print and clean up the mounting holes. I set the holes to be 3.4mm in diameter so a M3 or 6/32 will fit.
- Capture nut space will need to be cleaned up as well in order for the nuts to fit.
- Replace part #291
- Optional: If the mount is too low, you can drill another hole higher than the original.
Category: 3D Printer Parts