92 models
This mount is for the Logitech C270 webcam. It uses the C270's hinge pin so no need for any extra hardware. Allows for horizontal and vertical swivel to get your camera alignment just right. December 2017 - Created a generic mount that…
I modified the Prusa i3 MK3 fan shroud to fit my Printrbot Simple Metal that I equipped with an E3D v6 hot end. Successfully printed in PLA on a Prusa i3 MK3S+
This is my Multi Material Upgrade (MMU) for the Printrbot Metal Plus inspired by the Prusa MMU. This collection of models has parts that I have remixed from: Josef Prusa (I used his MMU for a base to make mine)…
This fan shroud is optimised for use on the Prinrbot Simple 1405 with an E3D v6 Hotend. In theory it also works with the Ubis, however I can not guarantee, that it lines up correctly. There is a normal version (redone) available that…
This is a remix of a remix, The original was from SpannerHands over on Thingiverse. Basically it's a pair of feet for your Printrbot Metal Plus with one of them having an LED 12v 30A PSU build in. It allows for the wires to pass through…
Using other z-rod-mounted filament spool holders, I found that they caused undue tension on the filament when using fast retraction. The ones that tried to resolve this relied either on metal bearings, or overly complex (and large)…
I love the improved fan duct but with the addition of the squirrel cage fan it was just too short. This remix simply extends the base of the shroud so that it can reach the plate without a fan being in the middle. I printed this without…
Redesigned fan shroud for the Simple Pro Print instructions Unassociated tags: Fan Shroud, Simple Pro Category: 3D Printer Parts
Yes I know another spool holder for the Printrbot Simple metal, but wait I have reasons. I found with a few spools of filament I have bought recently were too wide to fit on the holder properly so knocked this one up. As with others of…
This is a simple mount to add an action camera to the Printrbot Metal Plus. It has been created in TinkerCad using the file listed by idgoodname and also the mount part of this thing http://www.thingiverse.com/thing:1656798 by…
This is my Multi tool set up for a Printrbot Metal Plus, please see this video for more details ( https://youtu.be/8mQzwzCf-Mw ) You will require extra hardware along with the printed parts, this is explained in the video. This thing was…
Warning: This is made to work with a BMG extruder as it moves a bit the hotend position from the Printrbot extruder
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/dY7R20XRKJ6 This is a bracket to mount a Printrboard (Printrbot electronics board) to one of the Printrbot's Z motors. Print instructions Category: 3D Printer…
UPDATE 1/5/2015: Version 7.2 uploaded with a version that (hopefully) fits the new metal hotend from Printrbot. Feedback on the fit is appreciated. The duct is also slightly wider for better airflow. The Solidworks file contains both…
Cable clamp that holds wires with a zip tie to hotend to reduce stress on wires. Print instructions Unassociated tags: cable mannagement, play v2, wire clamp Category: 3D Printer Parts
A quick remix of DaveM's mount for the Simple Metal, this fit's Printrbot's own RGB LED strip. Print instructions Category: 3D Printer Accessories
These are parts and a base design to support a bunch of upgrades to the Printrbot Simple Metal. I have more detail on each of the upgrades on my web site here . Here is a list of all the upgrades: * Wooden 'Throne' Base Duet 2 Maestro…
With the PrintrBot Simple Metal approaching end of life, I've been thinking ahead in terms of replacement parts. Most of the parts on the PrintrBot are fairly generic or can at least be (relatively) easily swapped out with industry…
There's probably not a lot of people who might need this, especially since the Gen1 Printrbot is no more, but I was tired of vinnivg 's wonderfully small " A very compact Raspberry pi B+ and Pi 2 case " slipping out from underneath my…
Upgraded to the Gt2 32 teeth pulleys and only to realized they don't fit at all. Designed a new Y bearing guide that offsets the 608 bearings back a few to make everything fit. By all means, go for a 18 or 25 teeth instead, don't make the…
It is an alternative to Kipdevs Development platform wedge. This is a first run, and I did not what to add the diamond design without asking Kipdev for permission to use. The development platform was one of the first things I printed when…
This is a clip-on mount for attaching a brushless blower fan to a Printrbot+ extruder. Assuming the extruder dimensions are constant, this will likely work for all Printrbots with laser-cut wooden extruders. It was designed to work with a…
Printrbot Simple 60mm and 80mm Fan Mount This will also give you an extra 5mm on your Z axis. Category: 3D Printer Accessories
Update 4/5/14: The gimbal tolerances on my printers seem loose so have added an updated stl with tighter tolerances. I printed out Parametric Gimbal, prints already assembled by Bluebie and have been playing with it for the past week. It…
My 5 year old daughter has been watching me 3D print for most of her life, so it was no surprise when she asked me if her dolls could have a 3D printer of their own. I originally intended to just print her one of the little 3D printer…
I built a Printrbot Simple Pro from parts, but didn't use a controller that used an LCD. I wanted to close the missing LCD hole and designed this to fit in that spot. The logo/text are remixed from motorbikemikexb9's "Printrbot Keyfob 3…
Complete enclosure solution for Printrbot Simple Metal with spool holder, power supply, raspberry pi mount, control panel, drawer, filament guide. Instructions Cut from 1/4" MDF and acrylic. All the nuts and bolts are M3 25mm with a…
Print replacement foot for Printrbot Simple Metal Pro. Use TPU.
Handle from PrintrBot Works great with PETG
This is an in-progress remix of Crispy001's "Printrbot Bed Stabilizer", altered to (hopefully) fit on a Printrbot Plus v1 (aka Printrbot Plus 1303 and Printrbot LC 1302). How I Designed This Crispy001's part was imported into Onshape,…
This is a mounting bracket to attach a marker to a Printrbot to create a make-shift pen-plotter. Instructions It may need some filing on the lower lip of the hole - the marker should be inserted up from below, to a depth where the marker…
Here is a PrintrBot Plus mount for my old Raspberry Pi camera holder for the Simple Metal. This works great on my Plus Metal (Model 1504) with heated bed, though I haven't tested it on earlier models. Please let me know if there is a…
I had some really bad Filament, which grinded itself into my upper Extruder Arm. And now every Filament does get pulled through that damaged Part. To prevent further damage and to guide the Filament properly i designed this part.…
I'm using Reflectix to insulate the underside of my heatbed. I was having problems with the bed warping slightly because the Reflectix was being compressed more on the edges. This support goes under the heatbed to limit the compression.…
This object is meant to serve the same purpose as the its original version, but to do it better. The biggest functional change is that its arms no longer bend around inside the extruder mount, it just drops into the holes in the mount…
After 4 years of enjoying my Printrbot Simple Metal (with lots of upgrades), I have decided to switch out the direct drive extruder and convert to a Bowden extruder, but I still wanted to reuse as many of the original Printrbot parts as…
The Simple can benefit from having less moving mass. McMaster parts needed: 52335K32 Metric Extreme-Temperature Tubing Made with PTFE, 2 mm ID, 4 mm OD, 1 mm Wall, Semi-Clear White. $2.45 Per Foot (two or more feet required). 5449K171…
After a board failure in my Printrbot Simple Metal, I replaced my printrboard electronics with a mini-RAMBO card and the latest version of Marlin Firmware. I hand-made a mounting adapter to fit the mini-RAMBO where the printrboard had…
I printed the fantastic Universal stand-alone filament spool holder from Creative tools ( http://www.thingiverse.com/thing:508896 ) and have been so happy with it - it's brilliantly designed, looks great and has does everything you can…
Remix of this design here: https://www.youmagine.com/designs/printrbot-play-integrated-fan-mounting-frame I edited this to accommodate a better individual fan shroud on the bottom fan which directed airflow better. I also opened up the…
Fixed by MakePrintable Category: Other
This clip will clamp an inexpensive USB LED light source to the base of a Printrbot+ (and likely LC as well). Instructions Purchase USB-powered LED lights. The model I bought is listed at Amazon as "Energy Saving USB LED Laptop Notebook…
Custom lid for rugged box with "Printrbot" embossed on it with a color change option.
Modeled from the OpenSCAD example009.scad fan endings. Installation The fan cover should snap onto the screw heads sticking out from the Y-arm, no tools needed! The screws will be near flush with the surface of the cover, sticking out by…
This is a Y Bearing guide with a thicker plate for a Printrbot. Instructions During our construction, this was the part that gave us the most concern - the flat plat was thin enough to be flexible, and it took quite a bit of pressure to…
These are the 3d printed parts for my fork of the Printrbot community dual extrusion project. Instructions and full BOM are posted on the forum, linked here: https://www.tapatalk.com/groups/monstercafe/ This is my BOM and instructions…
This mount attaches to the print bed so that objects stay motionless in timelapse videos. The design is snap together, requiring no hardware or tools. You can choose which arm file to print based on what side of the print bed you want to…
Printrbot metal plus Meanwell MW350-24 PSU holder with feet
Based on the LED Holder for Printrbot Simple Metal by Sibanamush . I simplified his design to use LED strip lighting instead of individual LEDs. The entire part is one piece and includes a skirt for blocking stray light and zip-tie holes…
This mount will allow you to put an 80mm fan on the front of your print head to blow air on the front of the extruder and print area. Could possibly be combined with a fan shroud to direct the air flow a bit more. Also could be tweaked to…
This is JohnSL's Y-Axis Sag Fix with the following changes: I added about 1/8" of material around all edges to make it stronger so that it would not break when you remove it from the built plate. I reduced the radius of the clearance cut…
After printing the sharpie color blender, I needed to push up my filament spool by a few centimeters. This is a simple sleeve and post, to gain some extra height. The pieces slot in fairly tightly, even to each-other, so if you need more…
Clips for holding a glass sheet on the Printrbot. Instructions Print off 4 clips, these were designed to work with the heat bed on a Printrbot+ with an 8" square 1/8 sheet of borosilicate glass from McMaster-Carr. The print had some…
Simplify3D model for a Printrbot Simple Metal with the extended bed upgrade. It's a very simple model but it's perfect for visualizing your work area. Category: 3D Printer Accessories
Just a simple set of mounts designed to fit underneath my PrintrBot Simple Metal, to allow fans to be mounted to cool the Z/X motors and stepper drivers on the main-board. UPDATE 09/01/2015: I found that the friction fit was a bit too…
I don't like pulling the power lead out of my power adaptor to switch off the printer, and also wanted an emergency stop switch on the front of the machine, so created this model in 123D Design to accommodate said switch.. The panel is…
Designed an extruder mount for the new Universal Extruder from this kickstarter project http://www.kickstarter.com/projects/qu-bd/open-source-universal-3d-printer-extruder-dual-ext There are some issues with this mount. One is that the…
A remix of https://www.thingiverse.com/thing:2773810 by MoonDoggy ( https://www.thingiverse.com/MoonDoggy/about ) and https://www.thingiverse.com/thing:2739523 by https://www.thingiverse.com/goofdad goofdad. I included all the parts from…
I never liked the spool holder on the power supply. I switched awhile back to using a monkey wrench over the top of the printer to hold the spools, and after getting away with temping fate that long, I decided it was time to do something…
I have an several times over upgraded original Printrbot Plus that's roughly equivalent to the Printrbot Plus v2.1, or 1306. I wanted to add a Geared v2 extruder to the printer but the only mounting kit for it was a laser cut plywood kit…
I've got a Printrbot+ 2.0 with, well I'm not sure which version of the extruder mount I have. The fan mount that came with it left a lot to be desired, and ended up cooling too much of the parts I was printing at a go so I put this duct…
Remix of fukanchick's Printrbot Play USB holder, modified by adding 0.5mm to the USB height. Fits Monoprice micro USB cables (the best value IMHO) that were too bulky to fit in the original design. Thanks to fukanchick for providing an…
This is a remix of the original Printrbot Simple light. I used the original for a few years and after recently upgrading to the all metal UBIS with cooling fan the original LED holder would not fit. So I added about 10mm to the original…
Z bar stabilizers for Printrbot LC v1 Category: 3D Printer Parts
Fits atop the smooth rods to be joined by a threaded rod for hopefully increased stability. Instructions Do NOT use as a handle - it fits onto the smooth rods, it does not in any form or fashion clamp to them, and should not be used to…
Printrbot logo in an OpenSCAD module, suitable for sizing and embossing positively or negatively on prints. Instructions Import the file in OpenSCAD, or just copy the module, translate and scale as desired, then union for a raised logo,…
So... I really like the design of Makerbot's new extruder, and I wanted to try it out. My solution? Since I already have a Printrbot, I decided to design an adapter to mount it with. Edit: My printrbot seems to not accept the M92 command…
My Printrbot LC v1 has a storied history, including printing its own repair parts when it arrived from the eBay seller (in a nearly empty cardboard box) in less than intact condition. This corrects the last long-standing problem with it,…
Printrbot Stabilizer mounted at the top of the Z -axis. Not sure if it reduces Z wobble but may provide more frame rigidity. I have no issues with Z wobble but if you're playing around with acceleration, doesn't hurt to add this. Provided…
This is an upgrade for my Printrbot Metal Plus spool holder ( http://www.thingiverse.com/thing:675439 ) The narrow roller bearings tend to lean over, and occasionally the spools become dislodged. These rollers overcome those shortcomings…
This piece fits into the bracket that holds the hot-end on the Printrbot Alu Extruder V2. It slides in and hold the hot-end in place without needing to use the tension screw. There is a hole to feed the screw through so that the bracket…
A modified laser cut part #291 to mount a 40mm cooling fan. The fan can be adjusted. Will work with a Printrbot Plus Solidworks 2012 available below. Instructions Print and clean up the mounting holes. I set the holes to be 3.4mm in…
Yet another Universal Spool holder. This one is printable in PLA on a 100mm bed. I designed it originally to stand on top of my PrintrBot 1405 Simple's Z-rods. Later I changed it to hang from the ceiling, because when it's on top of the…
Improve print quality on your Dual Extruder Printrbot Metal Plus by replacing the factory fans and shroud with dual blower fans. This provides much higher air flow for significantly improved print cooling. Printrbot has a bracket and…
Bracket for mounting an optical Z-endstop on the Printrbot Plus v2.0 using the mounting holes for the mechanical switch endstop. Instructions 3 perimeters, 40% infill I picked up the optical sensor from Amazon…
This is derived from my other enclosure where I decided to eliminate all the enclosure parts so I could install the new 10" X-Axis upgrade without making this giant table box enclosure. So I went with an open air design that can still…
after printing you will need 4x m3 nuts that you will install on the bottom of the plate. you will need 4 m3 x 10mm bolts for attaching the plate to the to the bottom of the printrbot, i designed them to be counter sunk to prevent…
stability feet that don't slip back and forth on the body. when printed they hold very tight to the frame and require some force to get on all the way. recommend not pressing down on the build plate. Print Settings Printer Brand:…
I wanted to add some rubber feet to my Printrbot Plus to give some more vibration dampening as I could hear the printer running all over the house through the vibrations on the table it's sitting on. This uses 16mm diameter self adhesive…
This is a case for the raspberry model B and the printrbot simple 1405. This is useful for people who want to realize a timelapse and/or use octoprint. Print Settings Printer Brand: Printrbot Printer: Printrbot Simple Metal **Rafts:**…
Printrbot Simple Metal stability feet and lcd mounting if you have the x axis upgrade you can print these flat if not you will need to turn them at a 45 degree angle on the z axis and they will print with supports. you need supports…
this is a simple remix of the printrbot® designed blower mount available here https://www.youmagine.com/designs/printrbot-blower-fan-mounts i added 2 square recesses and 2 hex recesses in insert nuts to allow for a better fit. also…
these are the accessories i made/downloaded. the ubis® 13s fan mount and blower mount are from the guys at printrbot®. the light holder and blower shroud i made, i found that the blower shroud from printerbot put too much air on the…
I took two automotive LED lights and desoldered the ends to expose the pads. wired them in parallel to the extruder fan on the printrbot board, this turns the led's on when the extruder gets above 60*C I believe and off again after cool…
I made this mount after having issues with the spacers others have made for the Printrbot Simple Metal. The spacers others have made barely leave any room for the UBIS mount to grip onto a V6 style hotend. This was created to help fix all…
filament guide for side hung filament on the printerbot simple metal Category: DIY
Remixed from goofdad's original. Added ball to accept ball & socket mount from MoonDoggy's https://www.thingiverse.com/thing:2773810 and cut a hole for access to bed mounting screw under cable relief section. Category: 3D Printer…
logitech c270 webcam holder for Printrbot Simple metal (with or without heatbed) Print instructions Category: 3D Printer Accessories
A very snug square fit, tricky to install, but seem to have unparalleled alignment unmatched by any other design. Attention: It has been observed that the Z nut can impede minimum Z height when using particularly large Z couplers. A new…
after printing you will need 4x m3 nuts that you will install on the bottom of the plate. you will need 4 m3 x 10mm bolts for attaching the plate to the to the bottom of the printrbot, i designed them to be counter sunk to prevent…
this is a simple remix of the printrbot® designed blower mount available here https://www.youmagine.com/designs/printrbot-blower-fan-mounts i added 2 square recesses and 2 hex recesses in insert nuts to allow for a better fit. also…
stability feet that don't slip back and forth on the body. when printed they hold very tight to the frame and require some force to get on all the way. recommend not pressing down on the build plate. Print Settings Printer Brand:…
