1 / 17
Elektronic focuser for Newton or Refractor with 2" dual speed Crayford 1:10 — image 1
1 / 17

Elektronic focuser for Newton or Refractor with 2" dual speed Crayford 1:10

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Elektronic focuser with NEMA17 for Newton or Refractor with 2" dual speed Crayford 1:10 for OnStep telescope goto…

Rating
0 / 5
Likes
7
Downloads
59
Makes
0
Views
894
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

Elektronic focuser with NEMA17 for Newton or Refractor with 2" dual speed Crayford 1:10 for OnStep telescope goto controller or my Focuser Hand Controller (FHC).

Wiring diagram and PCB on EasyEDA

FreeCad source code on GitHub

BOM:

1x NEMA17 Stepper Motor JK42HM40-1684 or similar types

1x 16 Teeth GT2 Timing Pulley with Bore 5mm for 6mm belt

1x 140-GT2 Timing 6mm belt

4x M3x10mm screws

2x M3x20mm screws

2x M3 nuts

4x supports under the M3 screws

4x 2.5x8mm self-tapping screws

4x 2x6mm self-tapping screws

Option I - For main 40 Teeth Pulley V1

3x M4 Grub

Option II - For main 40 Teeth Pulley V2 (Recommended for use)

1x Aluminum Shaft Coupler Pore Diameter: 4-5mm, DxL: 14x25mm

2x M4x6mm imbus screew

Option III - For metal main 40 Teeth Pulley

1x 40 Teeth GT2 Timing Pulley with Bore 5mm for 6mm belt

1x Shaft Ø5x50mm

1x Aluminum Shaft Coupler - Bore diameter: 4-5mm, DxL: 14x25mm

Option IV - For Cluch - 3D printed Shaft Coupler

6x M3x20mm screws

6x M3 nuts

Option V - For 3D printed 18 Teeth Pulley

2x M3x20mm screws

2x M3 nuts

NOTE:

My Focuser Hand Controller (FHC) is on Thingiverse

Wiring diagram and PCB on EasyEDA

Firmware and FreeCAD sources on GitHub

Update:

  • 2019-03-11 Add Refractor version
  • 2019-11-22 Add new version Pulley knob

Category: DIY

Tags