R34 GTR Rear Wing Blade Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OEM replacement rear wing blade rubber supports for the BNR34 GTR. Free 3MF from Code Red Performance.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The rear wing on the BNR34 GTR uses three small rubber supports that sit along the main blade and cradle the secondary carbon fiber or aluminum blade above it. These supports are not reproduced by anyone and do not come with most aftermarket wings. If yours are missing, cracked, or damaged, there has been no proper replacement. Until now.
This is the first R34 part from Code Red Performance. The 3MF is free as a contribution to the R34 community.
If you want a ready-to-install kit with pre-printed 95A TPU supports and matching M2.5 18-8 stainless steel hardware, the complete kit is available at coderedperformance.com.
Fitment Nissan Skyline BNR34 GT-R (R34 GTR)
Recommended Material TPU 95A. This part needs to be flexible to function correctly. Do not print in PLA, PETG, or any rigid material.
Tested and validated on Polymaker TPU 95A (black).
Recommended Print Settings
Printer: Bambu Lab P1S
Nozzle: 0.6mm hardened steel
Layer height: 0.2mm
Wall loops: 3
Top shells: 3
Bottom shells: 3
Infill: 15% gyroid
Supports: None required
Ironing Settings
Top surface ironing: Enabled
Pattern: Rectilinear
Flow: 10%
Line spacing: 0.15mm
Inset: 0.31mm
Angle: -1 degree
Ironing is strongly recommended. The top surface contacts the secondary wing blade directly and a smooth finish ensures proper contact and prevents any surface marring.
Hardware The mounting screws are M2.5 18-8 stainless steel. If you are sourcing your own hardware, make sure you match that spec. The 18-8 grade is important for corrosion resistance given the exposed location on the rear wing.
The Code Red Performance kits use these specific screws from McMaster Carr: https://www.mcmaster.com/99461A931/
Print Quantity Print 3 per car. The wing uses one support at each mounting point along the main blade.
Notes This model went through 4 iterations to achieve correct OEM dimensions. It installs without cutting, drilling, or permanent modifications of any kind.
Designed, engineered, and 3D printed in-house by Code Red Performance.
Built for the void.