Chair Leg Extension - Round and Rectangular (F360 Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Fusion360 parametric chair/table/stool leg extensions - both round and rectangular.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Round leg extension parameters:
height (default 20mm) – by how much you want to prolong the leg
depth (default 20mm) – how deep the leg will sit inside the extension
innerDiameter (default 20mm) – diameter of the leg
tolerance (default 0.2mm) – tolerance to easily fit the leg into the extension
wallThickness (default 5mm) – thickness of the extension around the leg
Rectangular leg extension uses the same parameters as above, only instead of innerDiameter following two parameters define the rectangle size:
rectangleSideA (default 30mm)
rectangleSideB (default 40mm)
To modify the parameter values, open attached f3d file in Fusion360 and go to „Modify“ -> „Change Parameters“. Attached STL files use the default values listed above.
Increase infill to make them more sturdy.