1 / 4
Mean Well LRS-150 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mean Well LRS-150 Case psu
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 1
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
🔧 Hardware needed
M4 Female banana sockets
Cable gland
Screws: 2pcs M3x8 countersunk
4pcs M4x10 countersunk
1pcs M4x6 TCE
🖨 Print settings
Material: PLA or PETG (PETG recommended for better heat resistance)
Layer height: 0.2 mm
Infill: 30&
Walls: 5 perimeters
Important (to avoid warping):
Use a brim
Set the first layers to 30 mm/s
Alternatively, use glue stick on the bed
Supports only if needed, depending on orientation.