1 / 1
Toyota Proace Sliding Door Striker Catcher (2015) - 3D Printed Replacement — image 1

Toyota Proace Sliding Door Striker Catcher (2015) - 3D Printed Replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The sliding door striker receiver on the Toyota Proace (2015, L2H2)

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
73
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

The sliding door striker receiver on the Toyota Proace (2015, L2H2) is a plastic part that tends to crack over time, causing the sliding door to not latch properly. This is an exact replacement part that can be printed at home and installed without any modification.

This part also fits the Citroën Dispatch and Peugeot Expert of the same generation (2007–2016) due to the shared platform.

Tested and working perfectly on my own Proace L2H2.

Compatibility:

  • Toyota Proace 2007–2016

  • Citroën Dispatch 2007–2016

  • Peugeot Expert 2007–2016


Print Settings:

  • Material: PETG (recommended for durability and heat resistance) I tried ABS, but it tends to crack at the layer lines. 

  • Infill: 50%+ recommended for strength

  • Infill pattern: Gyroid or cubic

  • Perimeters: 4+

  • Supports: Check before slicing

  • Layer height: 0.2mm


Notes: Do not print in PLA — it will deform in a hot car. PETG or ASA are the right materials for this application.

Tags