DeWalt (& 1.25" OD) Vacuum to 1" Conduit adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a set of 4 simple adapters to connect a DeWalt Handheld Vacuum (or other similar vacuum with a 1.25" outer…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 6
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of 4 simple adapters to connect a DeWalt Handheld Vacuum (or other similar vacuum with a 1.25" outer diameter accessory diameter) to a piece of 1" Schedule 40 PVC Conduit. A simple friction fit will create a (sufficiently) air tight seal to suck a pull line through a length of conduit (tested with a 25' length with 2 90 degree swept elbows).
All components will print without supports. I was able to print without brims but YMMV and brims are recommended for reliable prints.
Category: Tools