1 / 5
DeWalt (& 1.25" OD) Vacuum to 1" Conduit adapter — zdjęcie 1
1 / 5

DeWalt (& 1.25" OD) Vacuum to 1" Conduit adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a set of 4 simple adapters to connect a DeWalt Handheld Vacuum (or other similar vacuum with a 1.25" outer…

Ocena
0 / 5
Polubienia
5
Pobrania
6
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a set of 4 simple adapters to connect a DeWalt Handheld Vacuum (or other similar vacuum with a 1.25" outer diameter accessory diameter) to a piece of 1" Schedule 40 PVC Conduit. A simple friction fit will create a (sufficiently) air tight seal to suck a pull line through a length of conduit (tested with a 25' length with 2 90 degree swept elbows).

All components will print without supports. I was able to print without brims but YMMV and brims are recommended for reliable prints.

Category: Tools

Tagi