MXMRW 14 Mini Skid - Inner Wheel Seal/Grease Retainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Retainer sleeve that seals off the inside of the front wheel bearing from contamination.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made a retainer sleeve that slides on the front spindles and seals off the inside of the front wheel bearings from contamination. Since hub seals are not possible one these machines due to factory welds that are typically around the sprocket and the bearing hub, this was the best I could come up with to solve the problems of what a typical wheel bearing seal does. I Printed in PETG-HS because that's what I had on hand when I had the machine apart, a harder type TPU would probably be the preferred filament of choice. Note: It's a snug fit on purpose so that it stays stationary on the spindle as the hub itself rotates, so tap it on evenly. I have 50 hrs on my machine since the install and it's held up perfectly.