Shmallow - Lily 58 Keyboard Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3d printable case for the lily58 ortholinear split keyboard.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Shmallow!
Shmallow is a case for the lily58 ortholinear split keyboard. A few thing to consider to determine if this is the case for you:
It's designed for the lily58... duh.
It's specifically designed for a wireless build of the lily58. It only exposes one USB-C port for the microcontroller (for charging and flashing). No trss/secondary usbc port.
It does not expose the bootloader switch. I recommend having a bind in your keymap for going into flashing mode.
It covers up one key slot on the board (the one directly under the microcontroller).
It has no tilt. I would like to eventually make a tented version that's still as easy to assemble.
It has no cutout for a display.
Assembly
Assembly requires (per half):
5 x M3x3 heat-set inserts
5 x M3x16 flat head screws
1 x
top.3mf1 x
bottom.3mf1 x
switch.3mf
Optionally, I've provided pad.3mf which can be used to adjust the acoustics/weight of the build. Printing it out of TPU yielded a "poppier" sound than omitting it. For my build, omitting the pad made the keyboard have a deeper thock.
The model is designed such that you can mirror it horizontally to print the other half.
I also suggest getting rubber feet for the keyboard. I recommend SKUF feet printed from a soft tpu or molded from silicone if you have the capability, but I left the model agnostic to feet choice on purpose.
If you're looking to get a lily58 to put into this case, I recommend boardsource. Not affiliated, just like what they do.
Feel free to comment or reach out directly with suggestions for how this case can be improved