Silakka54 Slim Case Yet Another Remix - Travel Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This case allows easy transport of the Silakka54 keyboard when using the Yet Another Remix model by Bassamanator
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
This case allows easy transport and protection of the Silakka54 keyboard when using the Yet Another Remix model by Bassamanator (thanks for that awesome design). This case will snap together using 7x2.7mm magnets (x8) (I think this is 7x3mm nominal size? it's how my magnets measured).
Filament Type:
I used PETG-glass fiber, I think PETG would be fine. PLA may be a bit brittle but YMMV.
BOM:
You'll also need 8x of 7x2.7mm neodymium magnets to hold the case together. I believe these are 7x3mm nominal size, but mine actually measured 7x2.7.
Assembly:
If you use a composite filament like PETG-GF or PETG-CF you should have no problem gluing the magnets using CA glue. Hotglue will also likely work.