Harbor Freight dust collector intake adapter to 6 inch hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple intake adapter for the Harbor Freight dust collector to a 6 inch dust collection hose.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The Harbor Freight dust collector intake side is a ~5 inch connection and most dust collection systems use a 6 inch hose. I created this adapter to convert the 5 inch connection on the dust collector's intake side to a standard 6 inch dust collection hose. If you are planning on using this with the stock configuration, it likely would need to be printed out of PETG or maybe even nylon/ASA to deal with the impact of the chips hitting it. If you are using this with a cyclone system and are only getting fine particles thru the impeller, PLA would likely be just fine.
