Woven Lattice Pencil Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 50mm X 50mm X 70mm Woven Lattice Pencil Holder. PLease leave a make if you printed it!
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 6
- Makes
- 2
- Views
- 59
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
basic info
This is a 50mm X 50mm X 70mm Woven Lattice Pencil Holder
It is optimized for super easy and fast printing without supports perfect for beginners. Depending on your 3d printer it will take 2 to 3 hours. use of tape on bottom is recommended.
print settings
Layer Height: 0.2 mm (0.16 mm for higher text detail)
Walls / Perimeters: 3
Top Layers: 5–6
Bottom Layers: 4–5
Infill: 15–20%
Infill Pattern: Grid or Gyroid
Print Speed: ~50 mm/s
Supports: None/Brim recommended
Print Orientation: top facing down on build plate
licence
This model is for personal, non-commercial use only.
You may download, print, and customize it for yourself.
Selling, redistributing, or using the model or prints commercially is not allowed without permission from the creator. Based on a Tinkercad shape, modified and resized