Car Cup Holder Phone Stand – Galaxy S9+, 80 mm (Mazda CX-5), One Solid Part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Ø 80 mm puck that drops into the car's cup holder and keeps the phone upright in a 12.5 mm slot. Made for an S9+.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 486
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
A simple phone stand for the car. The puck drops into an 80 mm cup holder and the phone stands in a slot cut across the top. I made it for a Samsung Galaxy S9+ in a Mazda CX-5, but it can work with other phones and other cars if the sizes match.
Features
Ø 80 mm, 75 mm tall, to fill an 80 mm cup holder
12.5 mm wide slot right across the puck, 70 mm deep, on a 5 mm base
Rounded edges where the phone goes in
One part
Sizes
Measure your cup holder: the puck is exactly 80 mm across.
The slot is 12.5 mm wide: check your phone's thickness with its case.
Print settings
Flat base down, slot up: no overhangs, no supports.
The part is about 300 cm³ solid, so use a low infill to save plastic.
En français
Support de téléphone pour porte-gobelet : un palet de Ø 80 mm et 75 mm de haut qui se pose dans le porte-gobelet, avec une fente de 12,5 mm sur toute la largeur et 70 mm de profondeur. Fait pour un Samsung Galaxy S9+ dans un Mazda CX-5 ; il peut convenir à d'autres voitures et téléphones si les cotes correspondent. À plat, fente en haut, sans surplomb, remplissage faible conseillé.