1 / 3
Car Cup Holder Phone Stand – Galaxy S9+, 80 mm (Mazda CX-5), One Solid Part — zdjęcie 1
1 / 3

Car Cup Holder Phone Stand – Galaxy S9+, 80 mm (Mazda CX-5), One Solid Part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Ø 80 mm puck that drops into the car's cup holder and keeps the phone upright in a 12.5 mm slot. Made for an S9+.

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
486
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

A simple phone stand for the car. The puck drops into an 80 mm cup holder and the phone stands in a slot cut across the top. I made it for a Samsung Galaxy S9+ in a Mazda CX-5, but it can work with other phones and other cars if the sizes match.

Features

  • Ø 80 mm, 75 mm tall, to fill an 80 mm cup holder

  • 12.5 mm wide slot right across the puck, 70 mm deep, on a 5 mm base

  • Rounded edges where the phone goes in

  • One part

Sizes

  • Measure your cup holder: the puck is exactly 80 mm across.

  • The slot is 12.5 mm wide: check your phone's thickness with its case.

Print settings

  • Flat base down, slot up: no overhangs, no supports.

  • The part is about 300 cm³ solid, so use a low infill to save plastic.

En français

Support de téléphone pour porte-gobelet : un palet de Ø 80 mm et 75 mm de haut qui se pose dans le porte-gobelet, avec une fente de 12,5 mm sur toute la largeur et 70 mm de profondeur. Fait pour un Samsung Galaxy S9+ dans un Mazda CX-5 ; il peut convenir à d'autres voitures et téléphones si les cotes correspondent. À plat, fente en haut, sans surplomb, remplissage faible conseillé.

Tagi