Remade X and Y axis for the Smartrapcore
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I really liked this X carriage (https://www.thingiverse.com/thing:1505842/files) because of the built in belt…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I really liked this X carriage (https://www.thingiverse.com/thing:1505842/files) because of the built in belt tensioner, but the files were (and still are) bad and could not be sliced properly (not water tight) also did not included a e3d v6 mount.
One thing leads to another and I remade the X carriage and the Y slide parts, replacing the 608 bearing for 3d printed ones, but you will need a 6mm smooth rod where the 3d printed idlers will spin on, a screw will chew them in no time.
I used this fan duct https://www.thingiverse.com/thing:3160328
Print Settings
Resolution:
0.2
Infill:
25%
Filament: ebaycrap Use whatever works for you black
Category: 3D Printer Parts