Voron 0.2 Extended Feet – Improved Stability & Vibration Reduction
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slightly extended Voron 0.2 feet for better stability, clearance and reduced vibration.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
📝 Description
These feet are based on the original Voron 0.2 design, but are slightly extended in height to improve stability and reduce vibrations.
The increased height provides better ground clearance and a larger contact area, making them ideal for uneven surfaces or quieter operation.
Perfect as a drop-in replacement while maintaining the original Voron look.
🔧 Features
✅ Based on original Voron 0.2 design
✅ Increased ground clearance
✅ Easy to print – no supports required
📏 Differences from Stock
📐 Increased height
📐 Larger contact area
📐 More stable positioning
(Original appearance preserved 👍)
🖨 Print Settings
Recommended:
Material: TPU
Layer height: 0.2 mm
Infill: 35–50% 95A
Infill: 50-75% 90A
Perimeters: 4
Supports: ❌ Not required
Brim: Optional
⚠ Material Note (Important)
If you plan to use these as base feet with my TPU vibration damper feet, print them in:
ASA or ABS (recommended)
https://www.printables.com/model/1674288-voron-02-foot-extenders-tpu-clip-on-upgrade-for-st
This ensures proper rigidity and allows the TPU dampers to work effectively.
🔩 Installation
Installation is identical to the stock Voron 0.2 feet.
⚠ Note:
Due to the increased height, longer M3 screws are required.
Recommended: +2–5 mm compared to stock.