CR Touch Mount for E34M1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redesigned CR Touch mount for the E34M1 toolhead.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Installation and use should be fairly straight-forward. This mounts to the E34M1 toolhead and is for use with the CR Touch ABL probe.
My design basis was the Phaetus Rapido hotend (not UHF). The probe should sit ~3mm above the nozzle in the retracted position. When extended ~3.6mm below. This may be able to work for other hotends with similar offset in the E34M1. I would probably keep it within +/- 1mm on Z offset.
I angled the CR Touch to try to minimize the X and Y offsets.
X Offset: 34mm Y Offset: 13mm
Hardware Requirements:
M3x5x4 (Voron Style) thread inserts, qty=2
M3x6mm socket cap screws, qty=4
CR Touch Probe
Suggested Print Settings:
Layer Height: 0.2mm
Infill: 30%
Supports: Not required