Simplisafe Entry Sensor Covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed covers for SimpliSafe entry sensors — swap the plain white for black, wood, or any color to match your frame.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 32
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
SimpliSafe only sells their entry sensors in white, which looks out of place on dark window and door frames. These covers slide over both pieces of the 2-part entry sensor — the active side (with the status LED and reset button) and the passive magnetic side — letting you print them in any color or filament finish you like.
Designed for a snug but removable fit: the covers slip on by hand, stay put during normal use, and come off cleanly if you ever need to access the sensor. A pill-shaped hole on the active-side cover lines up with the status LED. No hole is included for the reset button—just pull the cover off to reset and slide it back on; no adhesive needed.
Print Settings
Material: PLA or PETG (PETG recommended for longevity near windows in direct sun)
Layer height: 0.2 mm
Perimeters / walls: 2 (0.8 mm at 0.4 mm nozzle)
Supports: None required
Orientation: Open end down (flat on the bed)
Fit Notes
The interior is sized with 0.3 mm per side clearance over the sensor body. If your printer runs tight, scale X/Y by 101–102% or re-slice with slightly more horizontal expansion. If it’s too loose, try 99%.