Zero Clearance Insert for Skil 1340Aa

Zero Clearance Insert – Skil 1340AA
Precision. Stability. Cleaner cuts – instantly.

Upgrade your Skil 1340AA with a purpose-built zero clearance insert designed to deliver cleaner cuts, improved control, and a more professional result in every pass.

By eliminating the gap around the blade, this insert provides optimal support for your workpiece, reducing tear-out and chipping, especially in fine cuts and delicate materials. The result is smoother edges, higher accuracy, and greater confidence at the saw.

Designed to reuse the original four adjustment screws, this insert allows precise height leveling for a perfectly flush fit with your table, no modifications required.

Why choose this insert:

• Perfect fit for Skil 1340AA

• True zero clearance for superior cut quality

• Uses original adjustment screws (4x)

• Fine-tunable height adjustment

• Increased support and stability during cuts

Installation:
Transfer the four adjustment screws from the original insert. Adjust until the insert sits perfectly flush with the table surface.

Lower the blade fully before installation. Install the insert, then slowly raise the blade through the material to create a precise, custom zero-clearance slot.

Pro tip: If your installed blade contacts the insert during the initial cut, start with a smaller blade to open the slot, then switch back to your desired blade.

Print recommendations:
For best performance and durability:

• Use a strong material (PETG, ABS, or similar)

• Ensure 100% infill in the blade path area for maximum strength

• If the model is too large for your printer, split it in your slicer and reassemble using dowels/plugs and adhesive

Important:

• Always verify fit and function before use

• Use at your own risk

• You need a M4 12mm to fasten the knobb