JetKVM Under Desk Mount (Remix - Slim & added Cooling)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.16 – €1.42 net (excluding VAT)
For file: JetKVM Under Desk Mount (GREG MOD)_0.4n_0.2mm_PETG_COREONE_1h16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.29 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.26 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An under-desk mount for a JetKVM, a workstation remote access or power control device - Reduced Profile & Added Cooling
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This remix has a reduced the profile (X Axis) so it has a slimmer/narrower profile, it will fit into tighter spots, and corners. I have moved the mount holes to centre of the model, using 3.5x25 screws. And the bracket is good for a friction fit of the JetVM.
I have added a vast number of honeycomb chambers, vertical and horizontal for improved cooling.
No supports required. I used a 0.4,mm nozzle with 0.2 layer height. Infill was set to 25% and I used PETG.