1 / 2
Magnetic Toilet Paper Holder (for radiators)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two part magnetic toilet paper holder which mounts to radiators.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Open Community License v1
Print parts as laid out in the file. No supports are needed. "Pins" should snap-fit into pockets, depending on how "dialed in" your printer is.
You will need 10pcs of 20x5x2mm magnets and superglue to fasten them (although the press-fit should be decently tight. I'd also reccomend doing something to increase the friction, so that they don't simply slide down the radiators, such as adding double-sided tape or a bit of hot glue overtop the magnets.
I printed on MK3 using Galaxy Black PLA.