Decathlon Thermos Bottle Bumper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a protective bumper specifically designed for the Decathlon QUECHUA 0.8L stainless steel thermos bottle.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
We all know the drill: a full bottle meets a hard floor, resulting in those nasty dents that eventually crack the outer lining. Once that vacuum seal is gone, your insulation is toast, and you’ll end up with water trapped between the walls after a trip through the dishwasher. This bumper adds a much-needed layer of defense to keep your bottle functional and dry. It might get destroyed after a fall, but at least it"s cheaper than a new bottle.
Print Settings & Tips
Material: I used PLA, which surprisingly survived the Eco program in the dishwasher (likely because the bottle itself acts as a support and heat sink). For better heat resistance, you might consider PETG or TPU.
Wall Thickness: 3 walls (= solid) for decent impact absorption.
Fitment: This is a tight fit. It is designed to be snug so it doesn’t slide off, but this also means your bottle needs to be relatively "round" still. If your bottle is already heavily dented, you might struggle to get it on!