Counting matching models…
The Forclaz Headlight from Decathlon is super bright and has a rechargeable battery. For emergency, it can also be operated with non-rechargeable batteries. The holder is designed to be easily fitted with zip-ties to the handlebar or the…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Lid for Decathlon Led Light QUECHUA Printed with supports
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
Simply a speedball balloon holder. Printed from PLA, nozzle 0.6 and layer height 0.4
Print approx. €4.17–€5.09 excl. taxPreliminary estimate for one variant
The Silvana adapter for Decathlon face masks can be used for CPAP assistance to help fight the COVID-19 disease. The functional design is inspired on Charlotte valve from Italy, redesigned from scratch with the philosophy of making it…
Print all 3 files with 100% infill and in a material that is suitable for outdoor use. E.g. PETG.
lost two feet of my chair in a trip, was already sinking into wet ground a bit before, found the original file and made the inner diameter smaller then removed the holes 2024/10/8 update: revisiting the file because I need to print a set…
This adapter enables the use of a car/bicycle pump to pump up an Air Seconds tent to the 7psi/0.5atm that is required. Can also be used for mattresses and other inflatable camping equipment. Be aware that a car/bicycle pump can easily pop…
A unicorn horn that attaches to the center-front hole of Decathlon's Oxelo B-100 helmet. I believe this one is the smaller size (47-52cm), but I might be wrong, and it could also work for both! I have included step files so that you can…
Replacement male side-release buckle for Quechua/Decathlon backpacks with a 40mm belt. This specific buckle was found on a “Quechua Bionassay 22” backpack, but will likely fit several other backpacks using the same design. The code on the…
A small part to attach your brake cable from front to back along the bike body.
Custom 3D printed spacers designed specifically for Decathlon VAN RYSEL Long Distance triathlon handlebar extensions. These spacers allow precise adjustment of aero bar positioning for improved comfort during long-distance cycling,…
Print the model with 0.2 mm layerheight and set all infill to cocentric. best to print with 100% infill and in PETG
EN I bought this tent Decathlon MH 100 (2People) a few years ago. When setting up, the two brackets always unfolded for me. So I always held them together with Velcro, which you use as a substitute for cable ties. But I didn't find this…
Its for the bottle that is shown on the picture, and it using original oring seal.
A stealthy way to hide an Air Tag under your bike seat ( modeled to fit the 27.5" Mountain bike Rockrider ST 120 Disc Seat: https://www.decathlon.co.uk/p/27-5-inch-mountain-bike-rockrider-st-120-disc/_/R-p-305496 ). The two pieces clamp…
This is a custom-designed mount to securely attach your Deeper Sonar (Pro+ or CHIRP+) to the FLTB-5 float tube. Fishing with a Deeper on a float tube can be tricky without a dedicated arm. This mount is designed to be compact, sturdy, and…
This is a cockpit with a Garmin Nav screen for the Hanger nine Super Decathlon. This is for the Giant scale 40% model but can be re-scaled to fit any model. If you prefer the version with a radio stack instead of the Garmin, the files…
This adapter can be used to connect a 3M filter to Decathlon Subea Easybreath snorkelling mask. Print instructions The print can be coated with XTC-3D which will make it 12-times more pressure tight. You will have to buy the 3M 6895…
The adapter has been designed to allow the use of filters on the Decathlon Easybreath mask, with the intention of creating a piece that is an excellent compromise for printing with less material, less printing time and best results. The…
This applies to popular and cheap Decathlon scooter. Original part got broken and no replacement parts are available by Decathlon. This mudguard serves as brake so without it the scooter is quite dangerous for a kid - thus unusable.…
A connector to use the Decathlon Pump to pump a Kite up. Used by myself on a Slingshot kite Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.10 Infill: 100 Filament: Generic petg Black Notes: Best…
I used a gum tape between the mount and the helmet to make it more stable and not ruin the helmet. For the nut I used an auto-lock type M5, but I guess that a normal M5 nut will work as well. To mount that on the helmet I used 2 simple 4…
A lightweight alternative mount for your rear bike light. Four small zip ties required (no metal screws make the mount lighter and more reliable). The mount is compatible with Decathlon/Elops lamps (wit clip 74852): Elops RL 510 Elops CL…
GoPro mount for Decathlon Forclaz HL900 (suits other forclaz headlights too) headlight. Best fit together with Rockrider GoPro mount on helmet ;) https://www.thingiverse.com/thing:5443026 Due to mechanical properties, print it separated…
Like Charlotte valve this design allow to connect Decathlon mask to respirators and alternatively two 22mm filters. Designed with the intention of creating a piece that is an excellent compromise for printing with less material, less…
Added step file, and example model I made for a cheap Aliexpress lamp. Let me know if you liked it. The lamp holder should be printed on it's side with only supports for the horizontal surfaces.
Hello, a quick remix for my Decathlon RC500 (flat stem). Print in PETG, 0.2 is fine, but you can try 0.16.
Version with improved airflow of Breami Valve Like Charlotte valve this design allow to connect Decathlon mask to respirators and alternatively two 22mm filters. Designed with the intention of creating a piece that is an excellent…
I bought these mirrored Decathlon goggles and they were alright. The L1 nose bridge was closest fit for me but still felt a little wide. So, I made a simplified functional model of the L1 nose bridge in Fusion 360 and scaled down the…
Backpack organizer for Mini Quechua (Decathlon) -Keep thing organized -Backpack stay always vertical -Protect from drop (Walls 3mm, infill 20%)
Relacement part for the Decathlon Evadict Ontrail 900 Headlamp. 3D model of the rear part acting as a battery holder.
Update added improved variant I kept the original design, but improved the rigidity and elegance of the shapes. The back is ergonomically shaped to copy the forehead. I paid particular attention to modeling the stops around the joint. I…
A little jig to help dry out the bladder. Length wise, its' a bit short, but this fits my 300 Voron. you can extra insert the closing slide to keep the bag open. The width might be a snug fit, but you can press down on it and it will flex…
Reduction for Decathlon Subea Easybreath 500 (wider snorkel) for filters using thread Rd 40x1/7" (NATO thread for gas mask filters). Use some some rubber gasket (40mm) or filter seal. Break out inner circle (its only for support).…
2025/05/07 UPDATE - I added two new variants, seeking a snug and tight fit. I created this model to hold my bike pump for my cycling sessions. It should fit any bike with the bottle holder screw mounts. The holder is compatible with bike…
Rack for the dumbbell set from decathlon. The model has two parts. the lower part is 1.5mm thick and can be printed in TPU with a simple filament change. Only works with filaments that sick to each other. PLA und TPU should be fine. You…
(EN) Backrest for the R500e cargo bike. This makes the little one sit much more comfortably. Can also be used to secure loads, as the bar can be freely adjusted and attached. The aluminum tube has a diameter of 25mm and could be purchased…
Adapter not tested, designed based on theoretical dimensions. Needs testing Safety cannot be guaranteed! Treat this as last resort option. I recommend to seal with silicone / tape.
All the four pads are very same. Print with TPU, additional perimeters recommended.
VIOO CLIP Decathlon Light Holder for rods - bike handlebar, seat rod... Instructions : Outer part needs to be printed using flexible filament (TPU…) (experiment with the toughness) Inner part needs to be printed using using rigid filament…
As already done by oceanreef for its masks, this adapter allows the mounting of 22mm filters for medical use, on the draining valve of the decathlon easybreath mask. This design is currently being tested. Used in combination with the…
The Valentine adapter for Decathlon face masks can be used by medical staff to protect from the COVID-19 disease. The functional design is inspired on Silvana valve from Vincent Groenhuis, inspired itself on Charlotte valve from Italy,…
Adapter is not tested, designed using theoretical dimensions, needs testing if fits nicely. Safety cannot be guaranteed! Treat this as last resort option. I recommend to seal with silicone / tape.
Print with durable filament: PETG or PLA.
This handy attachment allows you to clip in your decathlon snorkel to any goggles! Helpful if you lost the original clip or just want to attach the two together Enjoy!
Correa para los relojes de pulsera Geonaute W500, W700 y W900 vendidos en Decathlon. La hebilla es la original. Extraida de la correa rota. Strap for Geonaute W500, W700 and W900 wristwatches sold at Decathlon. The buckle is the original.…
Faite en sorte que vos objets dure plus longtemps en les réparant. Matière Petg buse 0.25mm, aussi valable avec une buse de 0,4mm. Utilisé le modificateur de Prusaslicer pour ajouter une surface rugueuse autour des percements sur les…
Ribbed lock washer for a Decathlon rear mud guard Rockrider Decathlon shop link . The washer parts got lost, as was the screw. This part fits the detachable part of Bahathor available under https://www.thingiverse.com/thing:5557395 .
A mount for the cheapest Decathlon handheld bike pump (ref: 8056700 ), designed for an O2Feel Peps N3 folding bike from 2016 (with the Samsung battery). It is equipped with 19.2 mm tube where it was mounted on the photo. It was designed…
Only another filter for Easybreath Decathlon. Warning! If you can not use any of these handmade adapters and filters, a certified device is certainly safer!!!
Changed rorys3D robust buckle to fit Decathlon's Nabaiji Xbase 100 swimming goggles (size S).
German: Adapter von einer Decathlon Pumpe zu einem Sub Ventil. English: Adapter from a Decathlon pump to a Sub valve.
As already done by oceanreef for its masks, this adapter allows the mounting of 22mm filters for medical use, on the draining valve of the decathlon easybreath mask. The design was conceived to be sealed with silicone to the body of the…
After some time of use the dynamo lever gone broke, I try to make a copy to replace the original the file is not perfect! (but it work) printed a .1mm (detail) for tiny parts like screw printed in prusament petg (pla is too weak) infill…
A custom 3D-printable connector that lets you mount your Decathlon SL510 clip-on bike light directly to your seat post. Designed for a standard 31.6 mm seat post, angled at approximately 75° , this adapter provides a secure fit (see note)…
Print in something non-brittle (that means: no PLA) and slip two o-rings into the grooves near the edge, like in the photo. Stick on your pole tips to keep them from scratching your stuff during transport.
Despite the mechanism proposed by Decathlon, I was looking for an idea to create a support to secure the fixation of the 70cm pull-up bar from Decathlon. Decathlon uses a rotation pression system to lock the bar up between walls inside a…
Replacement knife handles for knife from decathlon that uses the original screws https://www.decathlon.cz/p/lovecky-nuz-
For a Decathlon Caperlan 6m Travel fishing rod that I use as a mast for a ham radio antenna for SOTA/POTA. One part is to keep the mast upright (use on the lowest element of the fishing rod). The other parts are to hold the antenna wire…
I created this mounting system to be able to mount things to the outside of a Decathlon Quechua Airseconds tent. Examples are things like a Washing line, Tarp or even a Canopy. The Distinctive feature about this design is that both parts…
Set of clips for holding together the separated parts of the SUP Paddle (Itiwit Decathlon) Also compatible with any other 30mm paddle or any other cylindrical object (brooms, pipes etc.) I printed the clips from PETG but PLA will also…
This adapter allows to attach Olight Gober to the Decathlon Vioo clip.
semplicemente ridimensionato
My hand pump was older than the new model where Decathlon has introduced this adapter. I didn't want to throw away my pump, nor to buy the repair kit, because in the kit there are also other pieces I didn't need. So I just reproduced it.…
Adapter for Skoda Enyaq or other Volkswagen Cars to use the Decathlon ISO Cup in the Car. Diameter of the CUP 85mm
Quechua decathlon ultim comfort sleeping pad Schrader adapter For inflate pad through classic Schrader valve Print settings 0.2mm layer 6 walls 15% infill No supports
--- Update Version 3 The strap always sliped out so I desigend a bad version 4 and a version 5, which consists of two parts glued together. This workes like a charm since 3 month. --- The famous french sports equipment seller forgot to…
Cap for the Decathlon Forclaz MT500 walking sticks. They are quite loud without any cap on the end when walking on hard surfaces (road or rocks) Therefore I modelled an endcap to print in TPU At 100% the model is a very tight fit. The…
Never let anyone else take your bottle by mistake. Especially useful when both your kids want the same exact bottle and then they can't agree who owns which. Or when they loose those bottles at school Sized to fit Decathlon 900 Ecozen ®…
The two parts to make from the Decathlon mask a breathing mask
charlotte Valve modified for non decathlon Mask (chinese model)
Soft flask drying stand for decathlon 250ml or 500ml soft flasks. There are 5 versions: 1x 250ml 1x 500ml 2x 250ml 2x 500ml 1x 250ml + 1x 500ml Print settings any rigid filament any nozzle size (0.4mm recommended) any layer height default…
Snaps in the 3DHydro mount and the bottom securely grabs the Decathlon water bag. It's got a little lip on the Decathlon side to avoid the bag falling off when handling while empty. I printed this with : Fiberlogy Impact PLA 0,2 layers 5…
Accroche de mini-sonnette décathlon Genre : https://www.decathlon.fr/p/sonnette-velo-500-mini/_/R-p-143045?mc=8346321&c=NOIR Il y a besoin d'une vis M4 et d'un écrou. (nouvelle version avec empreinte pour l'écrou) Mini bike bell mount.…
🚐 Inflate your Quechua mattress with a car compressor This adapter allows you to inflate a Quechua Air Basic 140 cm 2-person camping mattress using a pump or compressor with a standard car tire (Schrader) valve connection . The original…
Hello Thanks a lot for the work provided by Vincent Groenhuis and his team for the awesome Silvana face mask adapter ( https://www.prusaprinters.org/prints/27214-decathlon-face-mask-adapters ) Here are some improvements/variants of the…
Part compatible with original Decathlon bag holder systeme Remove locking système and install it in New main frame Main frame - no supports - PLA or PETG infill 15% Hook - no support - PLA or PETG - ajuste infill to load up to 100% for…
Decathlon pull up bar lock basically locks the pull up bar from rotating PLA will probably do the job but I chose Fiberology ABS Plus and it works
When travelling with our caravan, we found it rather annoying that the paddles of our kayak were always loose in the back of the car. So I came up with a simple snap-on holder to hold the disassembled paddles neatly in place. The fit is…
Injection-moulded Silvana adapter for Decathlon face masks (with white connector). This allows to provide oxygen supply to patients in CPAP applications (or filtered air for healthcare workers in PAPR applications) using the Decathlon…
hello i print with 0.6 nuzzle so i printed the part with 1 wall and 100% infill if you use 0.4 nuzzle i recommend to use 2 walls with 100% infill
Simple chair-mounted cupholder designed for 3D printing. Easy to clip on and keeps your drink stable while sitting and drinking coffe. Fits to standard quechua mug. No support needed, recommended layer height 0.3 mm. PLA 20%.
I initially printed a pair of handles in PLA. PLA tends to be brittle, which made the model break after a few days. I then printed a new pair in TPU, and it turned out to be much more durable and resistant. If you need extra strength and…
Should work with any decathlon light that has a clip, such as: LED Clip 900, LED 100, SL510, RL510, Elops, etc. Two models are attached, angled for the head tube or the seat post. Need two zip ties for each.
The adapter has been designed to allow the use of pulmosafe v3/2 filters on the Decathlon Easybreath mask (diammeter 32,5 mm)
I designed this spacer because the default sensor rubber is not close enough to the magnet , and when I say not close enough, I'm saying very very far away, which is curious because both of the bikes that I tried are from Decathlon, I…
A handle broke in my daughter's water bottle. 15 minutes in CAD and a replacement part is ready :) Source file included in case you want to emboss a name and make the handle into a name-tag Print instructions: Print with supports, 0.2mm…
The adapter for Decathlon hose enables quick inflation of mattresses, paddleboards, and balls directly from a scuba tank
First version of the adapter to use Decathlon Doll Seat (https://www.decathlon.cz/p/sedacka-pro-panenku/_/R-p-303265) to be used on Woom 3 bike. Decathlon bikes use seatpost with diameter of 25.4 mm, while Woom uses 22 mm. This adapter…
Mount to place the "Elops 100, Universal Bike Bell" from Decathlon on a Garmin female connector.
I have this great headlight HL900 by Decathlon for a few years but Main brackt that holds lamp itself on strap broke. Sad but true reality. I tried to use several types of glue to repair it but with no good efect. So I designed my own…
Bicycle support for Decathlon pump. The diameter of the pump is about 29 mm, while the diameter of the hooking slots is 20 mm. Print it vertically with supports and the slots turned to the right or left so that the tensile strength is…
An adapter to allow you to use the ‘deflate’ side of your hand pump to function as a vacuum pump. I like to use vacuum bags while packing up for the family camping holiday in a tent. They save a lot of room. At home I can easily use a…
This model has been optimized for use in combination with a double filter on the drain valve of the EasyBreath Decathlon mask. https://www.prusaprinters.org/prints/29343-double-22mm-draining-valve-adapter-for-easybreath- The device is…
Hook for some models of Decathlon tents, used to attach the tent canvas to the hoops. Printed in PETG for greater resistance.
The original chainring guard on my Riverside 500E (Decathlon) cracked after normal use — and I quickly discovered that no spare part was available , either through Decathlon or third-party suppliers. Rather than leaving the chainring…
The light from Decathlon did shine too much so I made a cover. It is with slot for the charging port.
Our local hospital was looking for some adaptors to plug a filter on the top of Decathlon masks, either direct (Covid Cases), or behind a flexible pipe (non Covid Cases) using a 22mm Male/Male adaptor. Print instructions You can print the…
Wasn't happy with original seat. I'm 196cm (6'5) so clearly it was too low. Seat itself was too "cushiony" for my liking Please be aware - seat post I'm using has fairly larger diameter (34mm) than average road bike seat post, please do…
Headlamp clamp for bicycle, fitting Decathlon's FORCLAZ, SOLOGNAC and CAPERLAN headlamps with trunions. Please check your headlamp's fixation to the headband before printing. If it fixes with trunions, this design will fit your headlamp.…
