Lifter Pendant Button Guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-piece protective guard for lifter/crane pendant controller. Prevents accidental button presses in industrial environ
- Rating
- 0 / 5
- Likes
- 0
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Standard Digital File License
Checkboxy zostaw jak są — No AI ✅, NSFW i Political niezaznaczone ✅.
Description — wklej ten sam co na MakerWorld:
A two-piece 3D-printed button guard designed to protect the controls on a lifter/crane pendant remote. Prevents accidental button presses and protects buttons from impacts in industrial environments. Tested in real working conditions.
What's included:
ClampBand — main bracket that wraps around the controller housing (95 × 87.5 × 30 mm)
ButtonWing — shield piece that covers the buttons (55 × 15 × 30 mm)
Assembly requires 1× M5 or M6 bolt + nut
Recommended print settings:
Material: PETG or ASA (for industrial/outdoor use; PLA ok for indoor)
Layer height: 0.2 mm
Infill: 40–60% (needs to be sturdy)
Walls: 3–4 perimeters
Supports: not required
Estimated filament: ~75 g total
Print time: ~4–5 h (both parts)
Notes:
Designed for a specific pendant controller — measure yours before printing and adjust scale if needed
The clamp friction-fits around the housing; the wing attaches with a bolt through the mounting hole
Printed and tested in a real industrial environment
Designed by PrintCave3D