Bps.space Logo-coin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a logo-coin i traced with lines form the new Bps.space Logo in Autodesk Fusion 360! I printed it in the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a logo-coin i traced with lines form the new Bps.space Logo in Autodesk Fusion 360!
I printed it in the original Prusa Mini with 2 Filament colours (Vanila White) and Galaxy Black.
Additionaly and recommended is a Filament Change wiht the layer height of 0,20mm at:
0,8mm (layer 4) this will be the black base
2,6mm (Layer 16) change coulour to your memorizing infil by delting the top layer in slicer!
In the remaining 12 layers (25 layers total with 0,2mm layerheight!) I used the base colour.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Steel
Rafts:
No
Supports:
No
Resolution:
0,2mm
Filament:
Prusa PLA
multicolour recomended Custom Section ==============
the recomended filament change (M600) in Prusa Slicer for an aesthetic look!
Category: Coins & Badges