Counting matching models…
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+
Mini ITX NAS with external power supply and 6 HDDs bays. Print parts with 30% infill and 0.20mm (Standard Quality) The dust.stl must be printed without top and bottom layers and with 75% or more infill. The…
It's just a support for my airbrush compressor. It might fit to other compressor as its generic. Category: Art Tools
t's just a support for my airbrush compressor. It might fit to other compressor as its generic. It fits perfectly (i think) for the "NEO for IWATA" airbrush. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes…
Designed this model to fill some unused SFF-8088 receptacles to prevent dust from getting in them. Printed in TPU with 98A hardness. Fits perfectly
I bought from aliexpress but with no pci barcket so i made it myself. Enjoy !
This is an avionics bay for BPS Blip Flight Computer + Fuselage Tube connector for a 74mm Model Rocket . It connects 2 (74mm) x cardboard body tubes and holds the battery and the BLIP PCB Board in place. It is designed to be used with…
8 Port X 10Gb Base-T Ports, NICGIGA 10Gbps Network Switch Required a frame to mount the Ethernet switch to a wall. The Size has Been Adjusted from original to Fit different Device. 182mm x 45mm Very Tight Fit, Just Force it. I printed on…
Intro 3D Parametric Model (OpenSCAD) of holder for UGREEN 40Gbps M.2 NVMe Enclosure and standard 40mm PC fan (stackable) Detailed model design description, as well as source code are hosted on GitHub Demo photos uploaded here are in two…
Designed to allow the screen to open 10º past vertical. CAD file is parametric: OnShape
I print with no support in TPU
A simple designed under desk mount for a GiGaPlus 2.5Gbps 10 Port Switch. Print it front face down with supports.
I used two of these to connect 3 coils of ¾" ldpe pipe to the 2" pool pump outlet for swimming pool solar heating. Printed out of ABS, smoothed by acetone brushing. So far they've held up for 6 years.
I give you the BPS-7000! The shoulder stock on the original Boxer Pro has an uncomfortable buttplate, way too small even for a small guy like me. Finally there is a fix! No hardware needed, just print it, snap it on and go dominate the…
Designed to fit Ugreen 9in1 5Gbps version, might fit other from the series (model CM498). Two versions of the bottom piece: - short one only protects dock - long one additionally protects sticking out MicroSD card so you can carry it…
Laptop fan shroud for LSI 9211. You have to file and cut some parts.
Da das Kabel zum Mac etwas steif ist, fällt das Gehäuse um und liegt auf der Seite. Das gefiel mir nicht. Deshalb 2 von diesen Standfüßen gedruckt und das Gehäuse eingeschoben. Nun bleibt das Ganze stehen.
Acasis 10-port 10Gbps USB Hub OpenGrid Mount. Uses M4 hardware.
MAIWO40Gbps + Deepcool CK-AM209 passive cooling radiator mount printable no support. I made it.
Vented shell for the UGREEN 40Gbps M.2 NVMe SSD Enclosure ( https://www.ugreen.com/en-au/products/au-55316 ). This enclosure has heatsinks on both sides, so there's no flats for mounting to a laptop. This shell provides two 1" x 3"…
Customized in OpenSCAD to fit the Supermicro AOC-STGN-i1s card
3D-printable cradle/holster that wraps your ACASIS TBU405 PRO aluminium SSD enclosure and mounts it to the lid of a 13" MacBook Pro via a Quad Lock–compatible four-point twist lock. The drive slides in and is held by a snap-on end-cap;…
Here are 2 platforms to raise the NICGIGA 8P 5gbps switch from the desk surface. Bottom switch plate get a tiny hot, so raising it helps with cooling. Then, you have 2 "arms" that allow you to install a Noctua NF-F12 (5v pwm) fan blowing…
This is a remix of Joe Barnard's BPS Rocket Cradle that adds interconnecting braces to maintain spacing between multiple cradles. The braces connect to the cradles using dovetail joints. Two different lengths of braces are included: 150mm…
This is a logo-coin i traced with lines form the new Bps.space Logo in Autodesk Fusion 360! I printed it in the original Prusa Mini with 2 Filament colours (Vanila White) and Galaxy Black. Additionaly and recommended is a Filament Change…
Wall mounting for BPST 1/2" water pipe. (Somewhat) Parametric Fusion360 project file included. The perpendicular side to the wall is 1mm shorter than the diameneter of the pipe to ensure tight mounting. This is parametric in the F360…
I'm a little over 3 weeks into an amazing 30 day transformation with Purium products. I feel great and am down over 15 pounds of flab! The kit doesn't include a scoop for the green drink so I made my own.
