1 / 1
1x2 Wood T-Connector (4-Way Junction) — image 1

1x2 Wood T-Connector (4-Way Junction)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

For connecting cross-cut 1x2 from the lumber store to make furniture, boxes, outdoor chicken cages, garden cages, etc.

Rating
0 / 5
Likes
7
Downloads
21
Makes
0
Views
103
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Works for these furring strip boards:

https://www.homedepot.com/p/1-in-x-2-in-x-8-ft-Furring-Strip-Board-160954/100009348

Part of a set of connectors I designed to eventually make a rigid cage to keep the birds off the strawberries. They could probably also be used to make a cheap chicken cage too. Hopefully someone will do that and upload a make with a photo. For best results, I recommend predrilling the wood so it doesn't split.

Since this design is from scratch, I have a parametric CAD file where thicknesses, depths, etc. can be tweaked. If you don't want the 4th hole in the top, delete that extrude in the timeline. Printing diagonally would give it the best strength, but it may need a brim.

Tags