Lab Power Supply (PSU) fused 3CH (0-36V)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple lab power supply with fused voltage channels (1 variable, 2 preadjusted) and interal cooling (166x175x131mm)
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 27
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The power supply features four protected voltage channels. One channel provides a variable output voltage (SK150), while two other channels each supply a constant (pre-adjusted) voltage (XL4015). The last channel serves as a USB power output (5V, USB-A and USB-C). An internal fan provides cooling for the converters.
Using the built-in measurement units (SK150, M430), the voltage and current of each channel can be monitored.
Parameters:
Inputside:
- AC/DC 230Vac to 24Vdc/9A
- fused
Outputside:
- SK150: Vo=0-36Vdc, Io=7Amax, Pmax=150W; Display for monitoring, variable during operation
- XL4015: Vo=0.8-30Vdc, Io=5Amax, Pmax=75W; preadjusted, fixed during operation
- USB Moto-Adapter 24V/5V: USB-A & USB-C
- M430: Volt/Amp-Meter, Display for monitoring (2x)
- each channel fused
- external 24V-Connector (Backside)
Dimensions: 166x175x131mm
For ease of use, each channel can be connected via push-in jack terminals. In addition, 2/4 mm banana sockets are provided. The system uses micro blade fuses, which can be replaced easily.
The power supply is connected via a fused IEC inlet. Additional external devices can be connected through a rear-mounted XT30 connector.
See the attached instructions for more details.
(Let me know if you need more instructions, I also can prepare schematics on how to do the wiring if needed)
Since my CAD (NX Student version) doesn't support step-exports, I can't provide it yet. Let me know if you are interested in the step-files for easy remixing - I hope to find a way to share the data. In case you need adjustments, let me know if I can help you!
Recommended print settings (which I used):
Material: printed with PETG-GF (Eryone)
layer height: 0.2mm
nozzle: 0.4mm
wall count: 3
TOP/BOT shells: 4
infill: 25-30%, gyroid pattern
Orientation: flat surfaces should face the buildplate --> no supports needed!
The goal of the design was, to design flat parts which can be printed easily and ensure a ridig assembly. Also it should look clean from the outside, without many visible screws.
Cheers and happy printing!
Disclaimer!!!
This project involves the use of electrical components and power supplies, which may present inherent risks if not handled in accordance with appropriate safety standards. It is essential that all applicable safety precautions are strictly observed and that all work is performed with due care and diligence.
The author assumes no liability for any damages, injuries, or losses arising from the use of, or reliance on, this guide. All actions undertaken are at the user’s own risk and responsibility. Safety should be prioritized at all times.
CHANGELOG | ||
|---|---|---|
Version: | Description: | Date: |
V0.1 | Init-Version | 20.04.2026 |
V0.1 | Update: changed resolution for better handling (less resolution) | 20.05.2026 |