Counting matching models…
What is it? The Floppy Voltmeter Clock is a special clock that instead of using the usual rotating hands, or seven-segment displays in the case of digital clocks, uses two analogue voltmeters in a retro style. It is therefore a unique and…
Dashboard for powerbutton, voltmeter & usb ports. For Vfr 800 non HISS key bikes.
This is a desktop holder for the analog voltmeter we use in some of our kits. There are holes on the base that allow you to attach it to LEGO Technic Beams using LEGO Technic Pins. The holes can also be used to attach the mount to…
Take your DIY electronics projects to the next level with this functional and protective shell. Specifically designed for the popular XL4015 module with integrated voltmeter , this case transforms a bare circuit board into a finished,…
This is a simple mounting frame designed to install a 0.28″ mini digital voltmeter neatly into a case or enclosure. It provides a clean and secure fit and makes it easier to mount the display without glue or improvised solutions. The…
A simple voltmeter cap for Flygonial's Gryphon platform. Designed to fit on stock less variations of the Gryphon. Utilizes a cheap voltmeter off of Aliexpress to monitor the charge of the battery being used. Wired directly into the…
A few years ago I upgraded the radio in my 2005 F150 Lariat 2WD to support Android Auto. While I had the dash apart, I removed the factory 12V cigarette outlet, located under the radio in the center stack and replaced it with a dual USB…
Voltmeter to alligator clip adapter. You will need thin conductor wire (I used jewelry wire), hot glue, a soldering iron, alligator clips, and wire. Suitable for multimeters with a 2mm probe tip. Smooth fit with 2 turns of conductor wire…
Ein Gehäuse für den Blindschalter einer BMW R GS. So kann man ein 0.28 zoll LED Voltmeter einbauen um die Ladung der Batterie zu überwachen.
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
Passend für: https://www.printables.com/de/model/67118-ts100-power-adapter-for-makita-batteries PETG; 0,15 mm Schichtabstand; 3 Wandstärken und 20% infill. 4 x Gewindebuchsen M4 x 8,1 x 6,3. Die Bohrung für die Gewindebuchsen hat 5,2 mm…
Halterung für Voltmeter. Passend für VW Passat 35i und Corrado. Unteres Ablagefach in der Mittelkonsole
I wanted to replace the old Analogue Voltmeter with a new LED Voltmeter. I designed this frame to mount the new LED voltmeter in a frame that match the old meter looks and dimensions on the face of the PSU. The second version have the LED…
Mini portable voltmeter for testing car and motorcycle battery voltage. built with SAE connector for an easy plug and play operation. BOM: mini voltmeter battery SAE cable SAE connector (for voltmeter)
This mini-voltmeter case features a 7-segment LED display with segment sizes approximately 10 x 23 mm. The overall dimensions, including the board, are 11 x 33 mm. Mini-Voltmeter Case Display : 7-segment LED Segment Size : Approximately…
I wanted to have a mini voltmeter for quick measurements and polarity checks. With 1x1 Gridfinity footprint (credits to Zack Freedman) it's easier to access than my big one. Printed with 0.2 mm layer height. Any filament can be used…
kedze mam napajanie robene z dvomi materiamu Parkside tak som chcel mat prehlad o napajani. https://www.aliexpress.com/item/1005004705886608.html?spm=a2g0o.order_list.order_list_main.11.306d1802FarDQl
Holds your scope/meter probes away from the ‘stuff’ on your workbench. Retracts under the workbench when not in use. 30-Dec-2024: Made small changes to the ‘slider’ - added a detent underneath to help keep it ‘out’ and made the ‘wire…
Its an holder for an USB Charger with an integrated voltmeter and a KCD1 switch (round version). You need two M5x25mm Screws. USB-Charger:…
I made this socket for adding a voltmeter and USB charger for my Corsa C. It snaps into place. The voltmeter is one of those chinese ones that also includes 2 fast charging usb sockets and I just connected it in paralell with the lighter.…
I was looking for a solution to fix and remove if necessary my Pi Dim Boot, my OSSC and my mini voltmeters.
Notes: don't print the reference combined file uses M3 screw and nut to tighten uses 2 male and 2 female XT90 sparplug look at combined parts for reference use fitting screws to fasten the bracket use shunt that is correct for your…
Requires M3 45mm long bolts to mount to the super simple slide on only DIN rail adapter. Both parts print with no supports. Print the DIN rail on its side, and the case face up. A FreeCAD file has been provided for the DIN rail adapter.…
This is LY6W Voltmeter Case , designed to include an additional slot for installing a flat button . It is compatible with the LY6W DC Voltmeter , available on AliExpress . 🔹 Features: Custom slot for a flat button – allows easy control…
I found most of the models out there didn't fit the width of my Fluke 87 meter so I made my own. I decided to use standard ½" metal J-hooks to attach to the pegboard as I didn't want the printed ones to break off and drop my meter. This…
The Pasco Amper/Voltmeter Organizer is engineered to hold 8 Pasco measurement devices in a stackable configuration. Its design is optimized for 3D printing in PLA, ensuring consistent assembly and stability. The interlocking structure…
What is it? The Floppy Voltmeter Clock is a special clock that instead of using the usual rotating hands, or seven-segment displays in the case of digital clocks, uses two analogue voltmeters in a retro style. It is therefore a unique and…
Gehäuse für USB Tester siehe. https://de.aliexpress.com/item/1005002371533933.html?skuId=12000020382751022&pdp_ext_f=%7B Deckel und Gehäuse haben Nasen und passen stramm zusammen. Deckel kann nach Bedarf beschriftet werden. Gedruckt Mit…
Case for DSN-VC288 voltmeter-ampere meter. The hole is for the DC Power Connector 3-Pin 5.5 x 2.1mm (https://a.aliexpress.com/_EJAbB9W) 0.2 mm
Case for the well-known Meanwell LRS-50-5 PSU : https://www.meanwell.com/webapp/product/search.aspx?prod=LRS-50 Design specificities : - Case Front panel : IEC320 C14 inlet power socket with fuse and switch - Case Rear panel :…
For Mini LCD C 2.4-30V Car LED Panel 3-Digital Display Voltmeter Housing for cable mounting
Having a cheap and small power supply for tinkering with electronics might be useful. For 5V you can always just cut a usb cable - but a USB C PD decoy board will give you a selection between 5V and 20V up to 3A. Not all USB C power…
Square Analog Voltmeter Frame This 3D-printed frame is designed to securely and elegantly house a square analog voltmeter. Crafted with precision, the frame ensures a snug fit, protecting the voltmeter while providing a clean,…
Tiny Voltmeter Case I designed this case to suit the miniature LED voltmeter displays readily available on Amazon and Chinese sites. This is the description from Amazon. 0.28 Inch Mini Digital Voltmeter with 7 Segment LED Display 2.5V -…
this model is definitely still a little rough around the edges but it is getting the job done on my ESK8 for now. feel free to remix with attribution. voltmeter - https://amzn.to/4kF1RHN M4x35 - https://amzn.to/45PAaHq m4 nuts -…
I got some of these cheap voltmeters: https://www.gearbest.com/development-boards/pp_134717.html?wid=37 and I made an enclosure for them. I saw that other meters on the website (…
I was looking for an enclosure/holder for a voltmeter and temperature display, but couldn't find anything existing that was what I was looking for. I built these to screw onto the side of my printer enclosure (Stuva cabinet from IKEA). To…
Dashboard for powerbutton, voltmeter & usb ports. For Vfr 800 non HISS key bikes.
Voltmeter: https://www.aliexpress.com/item/1005005626548556.html? Cable: https://www.aliexpress.com/item/1005005416426422.html? Switch: ?
Simple push fit 2020 extrusion (front) mount for round digital voltmeter (ZN30) bough from Aliexpress. Designed with a little bit of spacing to route wires. https://www.aliexpress.com/item/1005003298236677.html
Simple cover for Meanwell LRS-150 power supplies with fuseholder an voltmeter. Voltage potentiometer can is accessible throuth cover. Parts: IEC Socket / Fuseholder: TRU COMPONENTS TC-10088372…
Remixed to panel mount to use with my battery pack / solar generator Category: Electronics
A neat enclosure for digital voltmeters, hole size 45 x 27mm. Keeps the display in a nice angle, uses 4 M3 brass inserts and 4 M3 bolts.
Mini voltmeter 4-30 V DC. I printed with a 0.25mm nozzle but it is probably possible to print with a 0.4mm nozzle. It is recommended to use glue for assembly. Dimensions of the module: 24 x 10mm. I ordered it from Temu but I think it is…
You need: DSN-DVM-368 Voltmeter Module, see also here . Buy at many places, e.g. here 12V car connector two 5mm cube magnets 60cm of any 2-wires cable Easy PETG print, no supports, layer 0.2mm. (PLA is likely fine as well.) With key ON…
Eine einfache Halterung für das Voltmeter ATORCH DT20W Tuya an eine DIN-Rail Schiene. Mit Baumstützen drucken.
Hi, this is simple voltmeter mount for e-bike. My voltmeter is 30mm in diameter, and has two fixing tabs. On the bottom there is a hole for the cables to connect it to wiring.
Hardware: Voltmeter 0-100V - https://www.aliexpress.com/item/1005010333024992.html?spm=a2g0o.order_list.order_list_main.34.71911802vFXQhX 2x M3x8 screw 2x M3 thread insert 1x XT60 male connector
This is a desktop holder for the analog voltmeter we use in some of our kits. There are holes on the base that allow you to attach it to LEGO Technic Beams using LEGO Technic Pins. The holes can also be used to attach the mount to…
This is a housing for an old voltmeter with a diameter of about 54mm. You can find such an old voltmeter on ebay or other marketplace. You need additional the following parts: - 6x M3 threaded inserts - 6x flat head screw M3 x 8mm or 10mm…
I appologize. This is a remix but I cannot find the printout that inspired me. Sorry for that
DH670 Voltmeter Amperemeter Halter mit Winkel und Schraublöchern Positiv getestet mit PLA und 60% Infill. Dieser Halter dient zum befestigen eines DH-670 Volt oder Amperemeter mittelts Verschraubung als Winkel.
Take your DIY electronics projects to the next level with this functional and protective shell. Specifically designed for the popular XL4015 module with integrated voltmeter , this case transforms a bare circuit board into a finished,…
This is a simple mounting frame designed to install a 0.28″ mini digital voltmeter neatly into a case or enclosure. It provides a clean and secure fit and makes it easier to mount the display without glue or improvised solutions. The…
A simple voltmeter cap for Flygonial's Gryphon platform. Designed to fit on stock less variations of the Gryphon. Utilizes a cheap voltmeter off of Aliexpress to monitor the charge of the battery being used. Wired directly into the…
made a tiny case for LCD Voltmeter features a digital Display as shown in pictures overall dimensions are: 40mm x 18mm x 13mm (width x height x depth) . Designed in Germany - Thanks Freecad
It is designed for a Voltmeter with the Sizes and i left a cut out for the cables. width: 26mm hight: deepth: 70mm Printing: Speed: 60 Material: PLA Infill: 10% Hexagon Time: 2 Hours 20 mins Print Settings Printer Brand: Creality Printer:…
A few years ago I upgraded the radio in my 2005 F150 Lariat 2WD to support Android Auto. While I had the dash apart, I removed the factory 12V cigarette outlet, located under the radio in the center stack and replaced it with a dual USB…
This is an adaptor to replace the old dial voltmeter on your boat. 2 M4 screws .The thickness of your gauge panel or fiberglass console is how you determine the length of your screws. you can also use washers to shorten your screws .…
This distribution buss for electronic bench and ham radio use takes 1 fused input from a power supply and sends it out to 5 separate fused circuits. I design the buss bar to be a 3/8 OD copper tube that is inexpensive or even as I had one…
Voltmeter to alligator clip adapter. You will need thin conductor wire (I used jewelry wire), hot glue, a soldering iron, alligator clips, and wire. Suitable for multimeters with a 2mm probe tip. Smooth fit with 2 turns of conductor wire…
Voltmeter-ampere meter case charger (DSN-VC288)
Ein Gehäuse für den Blindschalter einer BMW R GS. So kann man ein 0.28 zoll LED Voltmeter einbauen um die Ladung der Batterie zu überwachen.
You can use it from bottom or top down. The Ampmeter will fit from both sides. Thickness is 20 mm, the frame is not closed. You are able to remove the ampmeter in both directions by rotating it 90° (very comfortable if the cables are…
I designed and made this to monitor the battery voltage on my travel trailer. The main hole is slightly larger than 1-1/8" (actual size 1.135"). To reduce battery load, I added a momentary contact switch with a hole slightly larger than…
Hi, A few weeks ago, the battery in my old car suddenly died. The car and battery are both quite old, I don’t drive very often, and when I do it’s usually only short distances. That’s probably why the battery failed. During winter…
volt/amp metre http://www.banggood.com/0_28-Inch-Dual-Display-Red-Blue-LED-Panel-4_5-30V-Digital-Voltmeter-Ammeter-1-100A-p-1093413.html?rmmds=myorder metre used for the heat bed but wanted to combine a few things, trying to stop some…
This is a rear cover for generic cheap volt meter modules sized 22 x 10 mm, to shield the open electronics from touch or short circuit. The frame module is optional. If used with a cutout of a front plate, the rear cover can be used to…
This was one of my first 3d designed items. I don't remember what the print settings were but it was printed in PLA Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament:…
This is a voltmeter "DC Power Detector", holder mount on DIN rail - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które posiadam Zapraszam…
This is a flush mount Voltmeter 4in1 AC 100A, this is a triple holder for 3 phases - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które…
RobotDyn LM2596 Step-Down module case. The converter has a button, this isn't implemented in this design yet. This is a remix from the following item: https://www.thingiverse.com/thing:4056842 It should fit this LM2596 from RobotDyn but…
For an electronics project, I picked up some small and inexpensive voltage meters (VM). They include tiny mounting tabs on either side which take very small screws and leave the meter exposed and vulnerable to damage. This two-piece…
Housing to mount three LED voltmeters to a Sega Lindbergh PSU - Part Number 400-5457-01 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.25 Infill: 15% Filament: Any PLA Any Notes: Requires 6x M3x8…
Simple case that houses a multimeter (display) and a power switch, the case can be screwed to a surface. CAD files included, feel free to reuse. Components used: Multimeter https://www.amazon.de/gp/product/B08NTMX62K Powerswitch:…
Designed to fit all the generic 0.28" sized panel-mount modules available online. Extra space in the case is for project wiring. Use 2 M3x12 to attach lid and #6 screws to mount the case. Print lid face down and case back down. Example…
I added a pi for octoprint and need a way to power it. This was my first 3d so keep that in mind it seemed to work
I recently finished a big Dart Zone Pro Mk3 mod. During the build, I wired in a voltmeter from Foam Pro Shop and wanted to mount it where the insert is to the right of the battery tray. Scope7Tango on Thingiverse had already done a great…
I reuse voltmeter, translucent cover and metal ring from Aliexpress electric bike voltmeter (such as this https://www.aliexpress.com/item/4000706480827.html?spm=a2g0s.9042311.0.0.c86c4c4dmHJDaG ) because i find it too bulky. Print…
This small digital voltmeter is very low cost and often used in Arduino projects. This model will help with the design of the 3D box hole for the voltmeter display. EDA tool: OpenSCAD Print Settings Printer: Prusa Mini Rafts: Doesn't…
Closed holes on one side. Made cutout for wire connections. Added "V" for voltage. Category: Electronics
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
This is a part that holds this small voltmeters: https://s.click.aliexpress.com/e/_dZBPU7C (Affiliate link) I used it to modify a lithium battery charger, you can see how to in this video: Designed in Onshape, here is the link if you want…
The electric part comes from a throttle gas or similar. The original was in no way waterproof. Put the electrics behind 2 layers of clear heatsink. The top glass is cut from a broken sun glasses. Can be ziptied. Printed in PETG.
Ender 3 v2 Feet Riser - 38mm/45mm total clearance - REMIX! by pakkko English: I made a remix of the really simple Ender 3 V2 45mm Feet Riser here. A mini voltmeter was inserted into one foot. With this mini voltmeter you can control the…
Clock was inspired by the following post, which was also used as instructions for the whole build. I simply created the case for it that I used, and am sharing it in case others would also like to use it. Original Post:…
See https://www.amazon.com/dp/B00YALV0NG/ref=sspa_dk_detail_4
Description : This instrument has some useful functions for Arduino users. Besides being a voltmeter with data logging, it could answer questions like "how much voltage falls on the LED at 10mA current?" or "is this an IR LED or what?" by…
Description : See: https://github.com/boda-akos/STM32-Voltmeter-Data-Logger-Calculator This instrument has some useful functions for Arduino users. Besides being a voltmeter with data logging, it could answer questions like "how much…
Custom Box for Digital Voltmeter & Ammeter Fast and easy print to add a box to your cheap digital voltmeter and ammeter. For my setup, I used: 2 x M3 screws (6mm or 8mm) 5 x 4mm banana plugs 5 x M4 Binding Post (3 red and 2 black) 20 AWG…
Cut flanges from module. Jacks and voltmeter wired simply parallel. Glue the 3D halves together when wiring ready. Isolate bottom with a carton sheet.
an enclosure for the cheap LED Volt-/Amperemeter. you need: Volt-/Amperemeter 3 Banana-Jacks 1 7x7 on/off switch (optional) 1 JST-Connector (optional) circuit board for easy switch and connector mounting wiring: OpenScad file included, so…
Holder for voltmeter. Top cover cut from clear plastic - old cd rom cover. Uses the mini voltmeter. Printed in abs.
Build you own DIY Bluetooth combined voltmeter and ammeter. It communicates via Bluetooth with the phyphox app - a free Physics app from RWTH Aachen University. The device is based around a ESP32 microcontroller board and uses an INA219…
I need a enclosure for my mini voltmeter. So i design it in Fusion 360 and print it on my Creality Ender 3.
