1 / 2
Maurer Vacuum Cleaner Filter Adapter-82852 > 81009 — image 1
1 / 2

Maurer Vacuum Cleaner Filter Adapter-82852 > 81009

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An adapter to fit Maurer 82852 filters into Maurer 81009

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
17
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

For some reason, replacement filters for the Maurer 81009 vacuum cleaner have become incredibly hard to find. If your vacuum is still working perfectly and you aren't ready to send it to the landfill, this adapter offers a practical workaround.

This 3D-printable part allows you to use Maurer 82852 filters (which are more readily available) in your 81009 model.


I printed it in PLA, since it is rigid, the seal isn't 100% airtight. While it works well enough for daily use, keep in mind it’s a functional workaround rather than a perfect factory replacement. TPU may work a little bit better.

⚠ Use this at your own risk

  • If you suffer from severe allergies, I recommend sourcing original filters or replacing the unit. I cannot guarantee a perfect seal, and some fine dust may bypass the filter. The effectiveness of the seal depends heavily on your printer's dimensional accuracy and calibration.

  • The 82852 filter is smaller than the original 81009 version. This results in restricted airflow, which may cause the motor to work harder.

  • Monitor your vacuum closely. If it feels hotter than usual, turn it off immediately and clean or replace the filter. You will likely need to change these filters more frequently than the originals.

Tags