ATS Mini V4 Case with Magnetic Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protective case for ATS Mini radios which also provides some sound direction towards listener.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this case for the ATS Mini V4 metal as a Christmas gift and had a devil of a time printing it properly due to the heating system being broken all winter. I've finally got it to where I'm happy with it enough to share. A few things to note:
The slide switch is only known to work with the ATS Mini V4 metal receiver. If you try using it with one of the other versions it may snap the slide off on your radio. I broke the slide on my ATS Mini V1 in the early phases of designing this case and therefore lack the ability to make one I know is going to be compatible. If you snap your slide off don't come crying to me - you have been warned.
I designed it to be fairly tight tolerances so it's likely you'll need to scale by 1%ish in the XY axis depending on your printer and filament.
The slots for the lid tabs are designed for the lid to be able to tilt up and then slide out. They will be a little tight at first but should wear in fairly quickly.
12 magnets require are 10mmx5mm2xmm (lid requires 8 as they are double stacked). Polarity patterning is depicted in one of the photos.
https://buymeacoffee.com/statusquofugitive
ATS Mini V4 Metal
https://s.click.aliexpress.com/e/_c2uJ6fvV
50 SMA terminator for plug