Creality K2 Plus Poop Chute
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic K2 Plus purge chute fixed with magnets. Catches CFS waste without blocking rear exhaust ventilators.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
A functional, magnetic purge waste bin for the Creality K2 Plus and CFS multi-color system. It smoothly directs purged filament away from mechanics while ensuring the rear exhaust ventilators remain completely unobstructed for optimal thermal management.
Hardware Requirements
Magnets: 6x Round Magnets (4.1 mm diameter x 3 mm height).
Note: 4.1 mm is an unusual tolerance. Measure your magnets with calipers before pressing them in to avoid splitting the printed walls.
Print Settings
Primary Material: PLA
Support Interface Material: PETG
Layer Height: 0.2 mm
Wall Loops / Perimeters: 3 (Crucial for structural integrity around magnet holes)
Infill: 15% Gyroid
Update: support is needed only inside the tube if your printer does not have the capability to print overhangs.
Expert Note on Supports: Using PETG as a support interface for PLA allows you to set the top Z-distance to 0 mm. Because PLA and PETG do not bond, the PETG supports snap off cleanly, leaving a perfect overhang finish. Verify your flush volumes in the slicer are strictly calibrated when swapping between PLA and PETG to prevent cross-contamination and layer delamination in the main body.