1 / 7
Wio Tracker L1 Pro N-Connector — image 1
1 / 7

Wio Tracker L1 Pro N-Connector

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A modified Wio Tracker L1 Pro back with a N-Connector flange.

Rating
5 / 5
Likes
4
Downloads
23
Makes
1
Views
363
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

A modified back with a N-Connector flange.

The original front of the Wio Tracker L1 Pro can be re-used. Its only uploaded for convenience.

The threaded inserts for the flange need to be glued in, instead of heat pressed!
The holes are large enough for them to be pressed in tight with a tiny bit of glue. This is because the outer wall thickness is thin and would deform with heat.

You will need:

N-Connector Flange 7.5cm (RF-1 F113)

M3x4x5 Threaded Insert

M3x8mm Coutersunk Screw

Tags