LCD1602 Keypad Arduino Bedienpanel – Zahlenschloss
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.36 – €7.77 net (excluding VAT)
For file: Kombigehause Tastenfeld 16x2 LCD Display_0.4n_0.2mm_PETG_MK4_6h21m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.07 excluding VAT (range midpoint).
- Weight reported by the author
- 111 g
- Print time reported by the author
- 6.34 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
LCD1602 Keypad Bedienpanel – Gehäuse für Arduino Zahlenschloss & Zugangskontrolle
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 61
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Dieses 3D-druckbare Kombigehäuse macht aus einem 16x2 I2C LCD Display / LCD1602 und einem 3x4 Matrix-Keypad ein kompaktes Bedienpanel für Mikrocontroller-Projekte.
Ideal für:
Zahlenschlösser, Zugangskontrollen, Passwortabfragen, Menüsteuerungen, DIY-Controller, Smart-Home-Projekte, Arduino-, ESP32- und Raspberry-Pi-Pico-Anwendungen.
Das Gehäuse wurde so konstruiert, dass Display und Nummernpad sauber in einer gemeinsamen Front sitzen. Dadurch entsteht ein aufgeräumtes Eingabe- und Anzeigemodul, das sich auf Projektboxen, Steuergehäusen, Maschinengehäusen oder Prototypen montieren lässt.
Typische Anwendungen:
Arduino Code Lock / Zahlenschloss
Access Control Panel / Zugangskontrolle
Menübedienung für DIY-Elektronik
Eingabe- und Anzeigeeinheit für Sensorprojekte
Smart-Home- oder IoT-Bedienfeld
Controller-Frontend für Werkstatt- und Maker-Projekte
Verwendete Module:
3x4 Matrix-Keypad / Nummernpad
16x2 I2C LCD Display / LCD1602
Das Modell eignet sich besonders für PETG, kann aber je nach Einsatzzweck auch in PLA oder ASA gedruckt werden. Feedback, Makes und Verbesserungsvorschläge sind wie immer willkommen.
Das Display, das Nummernpad, Schrauben, Kabel und weiteres Zubehör findet ihr in unserem Shop.