Powder Check for Lee Reloading Press
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A basic powder check for the Six Pack Pro and other presses
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 46
- Makes
- 0
- Views
- 381
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a work in progress, but it should work; this goes up to 308. You will need two retention style springs. And a QD bushing. This is to tell you that the powder has been charged, not how much. A newer version will be released later that will include the feature. If anyone wants to remix it in the meantime, I have added the DWG files ;-)
NOTE: When printing, make sure the Powder Check Pin is downscaled to 0.98%, it will have a snug fit (Printed in PLA)
The Spring Ears need to be glued in place; these aren't attached to the body due to their strength and longevity
Happy Reloading.