Universal Toothbrush Holder / Universal-Zahnbürstenhalter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.95 – €7.27 net (excluding VAT)
For file: ZBBox_L.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.61 excluding VAT (range midpoint).
- Weight reported by the author
- 118 g
- Print time reported by the author
- 4.92 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stand for 2 electric toothbrushes from different manufacturers and various accessories or toothpaste...
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 65
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
EN:
I designed the following model at someone’s request. It is intended as a stand for toothbrushes and can accommodate various brands and types of electric toothbrushes as well as accessories.
The attached G-code file includes two pausing points so that sand can be added to the base and the lower half of the model. That is why the model is positioned at the very front, to make this easier.
Material: PLA (here eSun Marble), possibly sand for weighting
Layer height: 0.3 mm
Supports: none
Infill: 10% (if sand for weighting is planned to be inserted in a break, otherwise as desired)
ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
DE:
Habe auf jemandes Wunsch hin das folgende Modell entworfen.Ist als Ständer für Zahnbürsten gedacht, kann verschiedene Marken und Typen von elektrischen Zahnbürsten und auch Zubehör aufnehmen.
In der beigefügten gcode-Datei sind 2 Pausen eingefügt, um an der Basis wie auch in der unteren Hälfte des Modells Sand einfügen zu können. Deshalb ist das Modell auch ganz vorne platziert, damit das leichter gelingt.
Material: PLA (hier eSun Marble), eventuell Sand zur Beschwerung
Schichten: 0.3mm
Stützen: keine
Infill: 10% (wenn in einer einzufügenden Pause Sand zur Beschwerung geplant ist, sonst wie gewünscht)