1 / 2
Dewalt Drill Battery Bracket for Dirtbike DRZ 125 KLX125 Number Plate — image 1
1 / 2

Dewalt Drill Battery Bracket for Dirtbike DRZ 125 KLX125 Number Plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use your number plate mount for Dewalt Drill Power

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
137
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

About

Needed some lighting for a KLX125 aka DRZ125 which does not have a lighting coil. Considered winding the coil, but really only needed it for a weekend, and a dewalt 20v battery seemed like a common suggestion. 

I used a cheap adapter and DC/DC converter, and the mount holes are configured for that. 

Here's the link for the adapter https://www.amazon.com/dp/B0CQJDGQDB

There is an optional brace to keep the battery holder from straining too much when removing or adding the battery, but It ended up not being that necessary. 

Printing

I used Fiberon PET-GF, but most filaments would probably be sufficient for a short period. PLA will melt in the sun eventually. 

Like most things I print, recommend 3 walls and 20% Gyroid or more. 

Tags