1 / 2
Dewalt Drill Battery Bracket for Dirtbike DRZ 125 KLX125 Number Plate — zdjęcie 1
1 / 2

Dewalt Drill Battery Bracket for Dirtbike DRZ 125 KLX125 Number Plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use your number plate mount for Dewalt Drill Power

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
137
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

About

Needed some lighting for a KLX125 aka DRZ125 which does not have a lighting coil. Considered winding the coil, but really only needed it for a weekend, and a dewalt 20v battery seemed like a common suggestion. 

I used a cheap adapter and DC/DC converter, and the mount holes are configured for that. 

Here's the link for the adapter https://www.amazon.com/dp/B0CQJDGQDB

There is an optional brace to keep the battery holder from straining too much when removing or adding the battery, but It ended up not being that necessary. 

Printing

I used Fiberon PET-GF, but most filaments would probably be sufficient for a short period. PLA will melt in the sun eventually. 

Like most things I print, recommend 3 walls and 20% Gyroid or more. 

Tagi