1 / 5
Core One L Feet Vibration Dampening TPU Bellow — image 1
1 / 5

Core One L Feet Vibration Dampening TPU Bellow

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Built for marine use, but able to help you at home, these beasts should help give your CO1L a proper stance

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
289
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Hey All. First Off, Thank you Prusa Team, for with out you this and many other things wouldn't have been possible. 

Second, Born out of Need for me and what I'm doing with the CO1L, So, bare with me, but i wanted to get these live before i went to sleep. so i will update more but a brief rundown

please read the print files, they will tell you what to print. 

they are a pain to install only because you have to essentially unbolt the corner of the printer, use caution, prop the printer up against the wall. this will help with install angle and ensuring the panels dont move. 

USE the spacer. or metal washers. this is a 100% infill part and is floating to allow for adjustments, 

side bolt- m3x15mm
Bottom middle - m3x30mm


bellows:
overture 95A ypu
15% gyroid infill
3 walls
5 top and bottom layers

240c

be mindful of the times and weight of filament as they are set for single print of each right now. 

each foop is 134g x 4 = 536g
each bellow 64g x 4 = 256g

Tags