Lidl Crivit Telescope DSLR Adapter (PETG Recommended)- Prototype
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prototype DSLR adapter for Lidl Crivit telescope, designed for practical use and testing.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
This is a custom DSLR adapter designed for the Lidl Crivit telescope (Bresser type). The goal of this model is to provide a simple and functional way to mount a DSLR camera directly to the telescope eyepiece.
This is the first prototype version, created for initial testing and real-world use. While it works, there are some important limitations to be aware of.
The current design does not fully support stable horizontal mounting without additional support. Due to the center of gravity and leverage from the camera weight, the adapter performs best when used at an angle. A longer eyepiece holder is planned in the next version to improve stability and balance.
A refined V2 model is already in development and will address these issues.
Material Recommendation
PETG is strongly recommended.
Reason:
Better layer adhesion than PLA
Higher impact resistance
More flexibility under load (important for camera weight)
Better temperature resistance for outdoor use
PLA can be used for testing, but it is not recommended for long-term or outdoor use.
Recommended Print Settings
Based on the attached slicer configuration:
Layer height: 0.2 mm
First layer: 0.24 mm
Perimeters (walls): 5
Top layers: 6
Bottom layers: 6
Infill: 30%
Infill pattern: Gyroid
Supports: Enabled
Overhang threshold: 75°
Support style: Grid
Interface layers: 2
Top contact Z distance: 0.32 mm
Support pattern spacing: 3 mm
XY separation: 90%
These settings are optimized for strength and clean support removal, especially when printing with PETG.