1 / 4
GMKtec M6 Ultra Vesa Mount (100x100 Snap-Fit) — image 1
1 / 4

GMKtec M6 Ultra Vesa Mount (100x100 Snap-Fit)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Minimalist 100x100 VESA mount for GMKtec M6 Ultra. Snap-fit design preserves rubber feet. Optimized for PETG printing.

Rating
0 / 5
Likes
1
Downloads
20
Makes
0
Views
200
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

I designed this minimalist VESA mount because I couldn't find an existing option that felt secure without requiring the removal of the rubber feet. This bracket features a high-clearance design that snaps directly onto the unit for a clean, professional setup.

Key Design Features

  • Zero-Tolerance Snap-Fit: Designed to grab the bottom edge of the M6 Ultra chassis securely. There is no wiggle room once seated.

  • No Hardware Modification: The mount is spaced to accommodate the original rubber feet so you don't have to peel them off.

  • Correct Orientation: The open side is intended for the cables and power button. Note: The unit will only snap in securely when oriented this way; the opposite side will not lock in properly.

  • Thermal Management: The large center cutout ensures maximum airflow to the bottom of the PC.

Print Settings

  • Material: PETG is highly recommended. It provides the necessary "spring" for the snap-fit and handles the heat of the PC better than PLA.

  • Walls: 4 Wall Loops (Perimeters). This is critical for the strength of the clips and the mounting loop.

  • Infill: 20% (I used 35% modifiers specifically around the VESA holes for extra compression strength).

  • Supports: None. Print it flat on the backplate.

Hardware & Customization

  • VESA Pattern: 100mm x 100mm.

  • Screws: The 4mm holes with 5mm countersinks are a perfect fit for either M4 or standard
    6-32 screws.

  • Makers Note: If you want to use larger hardware, you can add cylindrical modifiers in your slicer over the holes at 100% infill to resize them without losing structural integrity.

Tags