Emergency Stop for Voron Trident or 2.4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skirt button holder and macro
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 9
- Makes
- 1
- Views
- 127
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I wanted a reliable Emergency stop button for my Voron
Not wanting to get too creative on something so important I bought a reliable button
https://www.aliexpress.com/item/1005004176517786.html
16mm diameter
The print contains 2 parts, one front, one back, to allow the button to be mounted to a Voron Skirt
Once you've done that you need to wire it up
I suggest wiring it between Ground and a GPIO pin on your Pi. You can use any GPIO pin (see https://pinout.xyz/) Sadly this does normally involve getting the crimpers out
Wire it as push-to-break so any wiring issue will trigger the emergency stop too. Then add to your moonraker.conf
[button estop]
type: gpio
pin: gpiochip0/gpio17on_press:
{% do call_method("printer.emergency_stop") %}
switch gpio17 for the number of your chosen GPIO